1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Alignment Question

Discussion in 'Suspension' started by bamelanc, Jan 13, 2019.

  1. Jan 13, 2019 at 5:56 PM
    #1
    bamelanc

    bamelanc [OP] New Member

    Joined:
    Aug 26, 2018
    Member:
    #18620
    Messages:
    94
    Gender:
    Male
    Orange, Texas
    Vehicle:
    2018 Magnetic Grey Platinum 4x4
    Addictive Desert Designs Stealth Fighter bumper w/ 40" Baja Designs Onyx6 arced dual control combo light bar and Smittybuilt X20 Comp 10k winch. Baja Designs S8 10" amber fog lights. sPod Control for lighting and compressor. ICON Stage 3 Suspension with tubular UCA set at 3". ICON Alloys Six Speed 17" machined/satin black wrapped in 285/75/17 Nitto Ridge Grapplers. TRD Performance Intake. TRD Cat Back Exhaust. LED Kit inside and out. ARB onboard compressor. Amp Research Power Step w/LED kit. Retrax XR Pro bedcover. Armadillo Bed Liner. Tint - 35/5/5 ceramic. Center Console Safe. Weather tech mats.
    18 CM with Icon Stage 3 w/Icon tubular UCA. Icon Sixspeed 17x8.5 25mm offset on 285/75 NRGs.

    I've had the truck aligned twice by 4WP and it still pulls to the right. Tires are wearing unevenly. I did the string check and found this.

    FD - 7/8 and 3/4
    RD - 7/8 and 7/8

    FP - 1 1/32 and 1
    RP - 7/8 and 7/8

    Used two jackstands and a string with a ruler and got these measurements. They indicate a slight total toe, but I think it's odd the front passenger is tucked in so much.

    Last alignment performed about 4k ago. About to take it to someone else that's recommended for aligning lifts for a second opinion.

    Thoughts?

    IMG_4601.jpg
     
  2. Jan 13, 2019 at 5:58 PM
    #2
    joonbug

    joonbug °°°°°°°°°°

    Joined:
    Oct 13, 2015
    Member:
    #1948
    Messages:
    16,850
    Gender:
    Male
    First Name:
    Joon
    NorCal - Dublin
    Vehicle:
    2020 LT DC
  3. Jan 18, 2019 at 5:39 PM
    #3
    bamelanc

    bamelanc [OP] New Member

    Joined:
    Aug 26, 2018
    Member:
    #18620
    Messages:
    94
    Gender:
    Male
    Orange, Texas
    Vehicle:
    2018 Magnetic Grey Platinum 4x4
    Addictive Desert Designs Stealth Fighter bumper w/ 40" Baja Designs Onyx6 arced dual control combo light bar and Smittybuilt X20 Comp 10k winch. Baja Designs S8 10" amber fog lights. sPod Control for lighting and compressor. ICON Stage 3 Suspension with tubular UCA set at 3". ICON Alloys Six Speed 17" machined/satin black wrapped in 285/75/17 Nitto Ridge Grapplers. TRD Performance Intake. TRD Cat Back Exhaust. LED Kit inside and out. ARB onboard compressor. Amp Research Power Step w/LED kit. Retrax XR Pro bedcover. Armadillo Bed Liner. Tint - 35/5/5 ceramic. Center Console Safe. Weather tech mats.
    Turns out the alignment was way off. 4WP equipment must be out of calibration because it was pulling the instant I left their garage.

    Southern Tire Mart in Sulfur, La did the alignment. Took about 30 minutes. I’m happy now, truck drives straight as an arrow.
     

Products Discussed in

To Top