Let’s see pics stock height Pro with 295/70r18

Wheelers Offroad sells the 1" Bora spacer along with a few other sizes.

 

.75" will probably work as well on a 295. That is the size I am thinking of using.

 

Right on thanks the 1.25 is making my truck really dirty

 

@Airfire06 Did you add spacers to the back as well?

 

Yes I did! Looks super good but jus too much dirt and stuff getting on my car. .75 or 1 inch seems to be the better route I kinda jumped the gun on 1.25 spacer

 

Before you buy the .75, I would call Wheelers and ask about the caveat that they have at the bottom under pricing. I am using TRD pro wheels so I need to make sure there won't be an issue with .75" spacers. I do not want to cut/shave wheel studs.

I am trying not to jump the gun either!

 

True that...honestly I almost wanna jus leave it stock it’s kinda a headache

 

Yea lmk....I posted about pics of the 1.25 spacer and tires if u wanna look at it...

 

Just got off the phone with Wheelers and they said the .75" almost always need to have the studs cut due to the length of the studs. 1" almost always fits and "should" fit with stock pro wheels without cutting. He recommends the 1", but doesn't have any in stock(8 on order in the 1") for about two more weeks.

 

Most always should fit lol...I know how that goes...I can tell u this 1.25 fit looks good jus my truck can’t drive down the road without it getting dirty...plus I had to pull back the front bumper plastic and take off the mudflaps...you know if anyone is rocking the 1inch spacer

 

Did u have to shave down the studs or did the 1inch spacers fit right on

 

The 1in spacers didn't require cutting the studs. I would think for the .75 you'd need to.

 

Thanks looks good is there a side pic how much it sticks out

 

Not the best photos. I really think it's just the right amount.

 

Does your car get super dirty fast did u put spacers in the back too

 

Truck stays pretty clean. I dont drive it very far during the week. Haven't noticed any rock chips or it getting to dirty. Only spacers on the front. Didn't see the point to add them in the rear

 

Right on thanks for all the help

 

Sorry one more question did u get alignment on it when u put the spacers on

 

No it wasn't necessary.

 

That one inch space is pretty dope!

 

just like @Voyagermike said earlier on in the thread. the 295/70 coopers are super close to the UCA, but do not rub. I'm considering the 1.25" wheel spacers all around. I have heard that anything less requires cutting the rear studs.. fronts are fine, rears cause issues because of length.

 

I just put 33 12.50 22s on mine.

 

howd you do your calipers?

 

it was part of the build through Southeast Toyota website

 

Nitto trail grappler M/T 295/70r18

 

That’s a sick truck

 

Joined the club
Cooper stt pro 295/70/18
Just waiting on the Bora 1" spacers

 

Guess I’ll be the guinea pig for Falken wildpeak at3w 295/70/18’s when the time comes. I hope no need for spacers but every tire different.

 

Was the dealer willing to put on 295/70’s upon purchasing your trucks? I currently have a 2011 rock warrior with SCS wheels and 295/70 R18’s that I’d like to swap over to a 2019 Pro but having a hell of a time finding a dealer to do so