What have you done to your 1st gen Tundra today?

I downloaded Techstream from a link provided in another thread here on Tundras and ordered up a cable to go with it. I'm very interested in what I can tweak on my truck. I doubt I'll do much with regard to performance tuning, but at the very least I'm hoping to change the TPMS settings or at least disable it.

The Woman has a 2014 Corolla so I may do some tweaking there with regard to unlocking and light auto on/off as well.

 

That's a proper looking 1st Gen.

 

Hey guys! I'm looking for an affordable stereo (bluetooth support) for my 2003 Tundra. I don'r care about apple car play or navigation. Just being able to play my musics and talk via bluetooth! Any ideas?

 

I've got the older model of this guy in my 04, BT and phone works well.
https://www.amazon.com/JVC-KD-X350B...36_SY340_QL65&keywords=jvc+kd-x330&th=1&psc=1

 

The collection begins:

 

We actually got some snow so I tested out the 4wd a little.

 

Where in TX?

 

Amarillo.

 

I wish you were closer I'm in the south Houston area. I need more 1st gen Tundra friends.

 

Nice truck! Are those FJ or Landcruiser wheels? What's your tire size? Looking good!

 

Same not alot of first gen SATX owners. my sister lives in houston so maybe we can meet if i ever go over there

 

My parents have a river cabin near kerrville so I'll be out your way soonish and there's TW members in SA and Kerrville.

 

installed a 2 inch front spacer lift today . Had some problems with clicking on the left side but took it apart again and found out the problem was with the bushing in the wrong place. The ride also feels better

 

Is that for the diff or trans case?

 

Good question. This is a two way breather for the front diff. On my truck, this breather is located under the hood is in the engine well on drivers side just below the battery. The transmission breather (one way) is directly next to this front diff breather. Both of these breathers just plug into their respective hoses.

This breather has a plastic body where the rear diff has a metal body that threads into the axle or in my case where I did the rear diff extension a clamp was used.

My transfer case breather is located on top of the transfer case! The spec diagrams from Toyota are confusing on this one. Its a hard spot to get to and not much higher than the rear diff. Wondering why nobody has concern for this area as compared to the online rear diff extensions links all over the internets?

 

Maybe it's not subject to as much abuse?

 

Installed some SPC uppers to compliment my King's. Install went great, they were extremely easy to line up as well. I’m an auto tech by trade and these have got to be the easiest control arms I’ve ever installed. Also installed and compass/temp. rear view mirror.

 

Very nice. I'm planning to buy those UCAs for Black Friday and have been wanting to do that mirror mod as well. I need to do more research on it though

 

Whatcha need to know?

 

Thanks. Factory Trd offroad 16's plastidipped.(my daily driver, not worried about offroad damage to the rubber coating) 1.25" hubcentric spacers, 285/75/16 falken wildpeak at3w tires, 5100s all around

 

Awesome username!

 

California? I like that black section on the bumper, tasteful detail.

 

I’m looking to run a similar setup in the future. Do you have any clearance issues running the spacers w/ 285’s? I’m assuming the 5100’s are your only form of lift? Is there any problem running 285 on stock rim?

 

Yupp. Southern California. San bern. Mountains. @ about 6200' elevation

 

No rubbing at full lock, no trimming. I have rear air bags, but are empty in the posted pics. I added the wheel spacers because the 285s were too close to my uca's for comfort. The tires fit great with the OEM wheels.

 

Nice! I want to do a weekend trip to Big Bear, maybe around February. I saw Mammoth just got snow and I'm jealous.

 

Awesome. We're heading to big bear on Saturday. Gonna run Holcomb and John bull. No snow yet. Sure is cooling down though.

 

Who has the best price on spc ucas

 

No more green, except for the clock but can’t fix that.