Trd sway bars

Can I install trd sway bars on my 2nd if it has a 7 inch lift ?

 

@1UPPER

 

Yes you can but you should have the two side links extended. David at coach-builder can do this service for you. You can mail him the two end links and he will extend and weld them for you. You will need to re powder coat them after the are extended.

@Coachbuilder1

 

What he ^ said

 

You can also go with a Hellwig sway bar and it will come with extend links for a lifted truck. They make two versions one 4 Non lifted trucks and one for lifted trucks.

 

Here's a picture of it on my truck with a 6" lift

 

@Prostar 190 thank you bro looks good I'm definitely gonna give them a shot . Do you really feel the difference?

 

I've had my Hellwig for several years on my 2010. The difference is evident from the first few miles. The TRD Bar is thinner with less adjustment capability and it's RED!

 

Very much so. I believe it really made a difference in pulling a trailer.

 

If I get A trd sway bar on a 3 inch think I would be good using stock links?

 

I would just run the stock links with a 3” lift. Some people have flipped the u bolt brackets to offset the sway bar placement. Not sure you really need to do that with a 3” lift.

 

Old thread, new-ish question. How much off roading is too much? I run forest roads of course but can also do pretty rocky jeep trails on occasion. Never any hard core bouldering though for sure. Leveling kit/ slight lift installed. Would I rip it off pretty easily? PS: I like the red!