Mark's 2015 Pro Build

Lol
Like minds......

 

He’s only using his off road. I’m already at 30,000 on in. It’s my DD

 

You should be ok. I’ll talk to my smog guy and see if it’s a serious issue.
The secondary still works the same. After relocate kit.
It would fail visuals if anything.

 

Yeah you are going to have to talk to him about the ride etc. I am just he man behind the wrench.. he didn’t even let me drive his truck with the new suspension on yet..

 

I cranked my driver side 3.5 turns and passenger 2 turns and I'm sitting at about 3.312" of lift in front. Rears are pretty even from before and sits more level now

Edit: I like a little rake so I'm waiting for the leafs to settle a little and then I'll upgrade to option 2

 

Yeah you def need the icon 3.0s. They are digressive so they start off stiff and then soften to dial into the terrain. I feel like the truck is more solid now and barrels through obstacles at high speed. No regerts!

 

I’m finally getting on some dirt tomorrow. Finally! @boardude so what you’re saying is I don’t need to slow down... ever. Got it.

 

The faster you go the better it is..








That's what she said.... bazinga!

 

I like rake too. When I look at my truck I feel it looks stock but with no rake. Yes, it’s a dope truck but I pull up to a stock truck and I’m no higher in the front but lower in the back. It looks gay

 

It’s the color.

 

That's the nice thing about the icons they're fully adjustable up front and the rears are multi-rate so you aren't stuck with the height/stance once they are on

 

Mines not adjustable anymore. I think I got some dirt in there and my shit won't turn on the passenger side anymore. Looks like I'm going higher than I wanted.

 

whahaaa those are brand new? how are they not adj anymore!?

 

I want almost 4 inches up front and a few in the back. I’ll end up preloaded like that so I’m not sure I’ll do it, but in my opinion the little bit of lift I have is barely allowing the 35s to fit. I don’t want a stupid Texas truck but a little more than I have. The Toytec truck is perfect and it’s at 4 with 37s.

I just don’t like the leveled look and I cant understand why someone to intentionally pay to “level” a truck

 

LOL

 

What do you plan for the rear?

 

IF I do any at all:
U748s and Mcm shackles or Alcan custom with added lift
Mathew said he could get me where I wanted to

Orrrrrrr get on the ICON bandwagon

 

Isn't the Toytec truck on a Boss setup that is adjustable up to 4"? That is probably max preloaded as well. I would rather be max preloaded on 3.0s than the others. Just go full bro and get a bracket lift lol

 

Did you remove the locking screw before you tried? There is a tiny locking screw in the collar you have to loosen

 

#FULLBRO_ON

 

Yeah, the one time I forgot to loosen it was when it got really tight. Maybe a tiny piece of the nylon screw grinded off and is jammed in there now. Whatever it is, it ain't moving.

 

Sounds like you need to go beat the hell out of it on the trails and try again lol

 

do you have the front of the truck lifted ? on My Kings we had to take the coil overs out and use spring compression tool to adjust them..a PITA but Icon is probably different. Is it only one side for you ?

 

btw Thread Hijack....

 

Yeah, only the passenger side is sticking. I wanted to lower the front to 3" or less. I guess I'm raising the driver's side higher now.