2003 wheel offsets

What size wheel offset do I need to need to flush out the tires on a '03 TRD with the stock white "bushwacker" type wheel flares? Tires are 285 75 r16 on 16x8. Currently the tires are sucked in about 1- 1.5". Truck has King coilovers...leveled out. If I can run 1.25 spacers I'm ok with that. Thanks

 

I'd assume your current 16x8 wheels are 0mm offset / 4.5" back spacing since that's a very common fitment. Easiest route would be a set of wheel spacers. 1.25" tend to be hubcentric, most 1.5" spacers are not. I'd recommend the 1.25".
Just make sure the hub diameter is specific to your Tundra and of course 6x5.5 (6x139.7) for the bolt pattern.

If you wanted new wheels and keep the same size of 16x8 it's easy to figure out where to go for fitment. Assuming you're at 0mm offset now, -12mm would push them out another half inch, -25mm would be one inch and so on...

Not very many choices out there with these lower offsets (lower backspacing).

 

Customwheeloffsets.com can help