1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Tiny ignition coil cracks(?) Stepside Rounded flare nut advice Techron, Seafoam or... 2005 DC 8Cyl Spark Plug discrepancy Timing Belt Service

Suspension Refresh Parts List

Discussion in '1st Gen Tundras (2000-2006)' started by _Spencer_, Sep 11, 2025 at 4:16 PM.

  1. Sep 11, 2025 at 4:16 PM
    #1
    _Spencer_

    #1
    _Spencer_ [OP] New Member

    Joined:
    Jan 22, 2025
    Member:
    #129221
    Messages:
    30
    Vehicle:
    2002 Tundra AC 4x4
    I'm planning a full suspension refresh now that the truck has proven itself (20k miles since November) with a slight lift using 5100s, OME springs, and HD leafs. I've got the majority of the parts and just ordered OEM lower control arms and all the camber bolts/nuts and I'd like any input on any parts I might be missing. I was unable to find new hardware for the UCAs so hopefully the existing hardware comes out okay.

    Here's my parts list:
    Bilstein 5100 front and rear
    $31 KYB SM5442 - Mount and Insulator
    KYB SM5442 strut mounts
    Old man emu 2885 springs
    JBA Upper control arms
    OEM Lower control arms
    ATS HD rear leaf springs + shackles & u-bolts
    MAXX suspension extended sway bar links
    Extended rear bump stops

    I'm unsure if I need to order insulators SM5413 for the struts or if that is included/unnecessary

    LBJs and inner and outer TREs have already been replaced. Any problems I should expect to run into or parts I'm missing? Any input is greatly appreciated.
     
    _Spencer_, Sep 11, 2025 at 4:16 PM
    #1
    G_unit3000 likes this.
  2. Sep 11, 2025 at 5:00 PM
    #2
    Elevatorguy

    #2
    Elevatorguy Yotas and JD Green!

    Joined:
    Dec 11, 2022
    Member:
    #88353
    Messages:
    502
    Gender:
    Male
    First Name:
    James
    Vehicle:
    05 DC, 4.7, 4wd, LSD.
    Looks good, same setup I just ordered. I didn’t get the leaf pack yet but in the near future. My JBA arms came in 2 days ago. Just waiting on the springs and shocks from first gen off-roading.
     
    Elevatorguy, Sep 11, 2025 at 5:00 PM
    #2
  3. Sep 11, 2025 at 5:06 PM
    #3
    KTM_AJ421

    #3
    KTM_AJ421 New Member

    Joined:
    Sep 1, 2023
    Member:
    #103221
    Messages:
    455
    Gender:
    Male
    First Name:
    AJ
    Houston, TX
    Vehicle:
    2006 SR5 DC 2WD 4.7
    265/75r17 M/T Baja Boss AT 17x8.5 -10mm SCS Ray 10’s Bilstein 5100’s 2nd notch
    That is almost exactly what I am looking at doing. I already have the springs and shocks now I want the uca and lca and a steering rack along with the suspension max end links
     
    KTM_AJ421, Sep 11, 2025 at 5:06 PM
    #3
  4. Sep 11, 2025 at 7:28 PM
    #4
    Chris948

    #4
    Chris948 New Member

    Joined:
    Jun 13, 2025
    Member:
    #136448
    Messages:
    53
    Gender:
    Male
    DFW
    Vehicle:
    2006 DC
    I would order toe adjust bolts to be on the safe side. Mine came out ok but it looks like a lot of people end up sawing them off.
     
    Chris948, Sep 11, 2025 at 7:28 PM
    #4
Register FREE to Reply!

Products Discussed in

KYB SM5442 - Mount and Insulator
$30.34
To Top