2020 TRD Pro Rigid Fog Lights

One (driver side) of my stock rigid industry fog lights went out. Two questions.

Do LED lights like this just go out or is there likely a wiring/connection problem?

If i need a replacement light, does anyone know the part number? I can't seem to find it anywhere. Appreciate the help.

 

Is a good idea to check the plugs for any water or debris and hope this solves the problem but if the problem is the LED boards then unfortunately buying a new one is the only way to get it fixed they are expensive I would also consider going with the Diode Dynamics SS3 PROs instead but if you want to keep it OEM style here you go


Right Hand Side
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-fog-lamp-right-hand-tundra-trd-pro-pt22834190ac?c=az0x

Left Hand Side
https://parts.toyotaofcoolsprings.com/oem-parts/toyota-fog-lamp-left-hand-tundra-trd-pro-pt22834190ad?c=az0x


Diode Dynamics SS3 PROs

https://hotshotoffroad.com/products/type-b-ss3-led-fog-light-kit-tundra


Or the full colection of Fogs Upgrades

https://hotshotoffroad.com/collections/14-21-tundra-fog-ditch-light-kits

 

Awesome- thanks for the help

 

Just a heads up...

Our Pros (with the OE Rigid fogs) have a square bezel in the bumper.

Most of the aftermarket fogs such the DD SS3s, etc. are all round, so you'll need to also source some different fog light bezels for a clean install.

With that being said, SS3 Pros are a HUGE improvement over the OE Rigid LED fogs.

 

https://ebay.us/m/d15F9s

 

Who makes square amber fogs for the Pro?

 

Are you asking about the OE Pro fogs... if so those are Rigid LEDs (white)

Rigid also makes an square aftermarket fog Rigid D-series Pros, probably not quite as bright as the DD SS3 Pro (which are round), but an improvment over the Pro's OE Rigid fogs...



I believe the part # for the aftermarket Rigids in amber is 504816, which are about $250 for a pair and will require some minor modificaitons for install but you'll be able to at least use the factory Pro bezel

PS>>> Here's a set that popped up about a month ago on the forum for sale w/the required brackets for mounting and adapters for wiring; not sure if they sold yet or not, but it will give you an idea... 1