2020 Tundra-Remote Start X install - Window control issues

Yesterday I installed the Remote Start X on my 2020 Tundra SR5. Immediately after installing the windows stopped responding and to any of the switches, including the rear glass. I removed all the installed remote start parts and the windows still didn’t work. I checked all the fuses with a test light and an multimeter and don’t appear to have any blown. I also unhooked the battery for 30 minutes to try and “reset” the BCM. I reinstalled the remote starter x installed and reprogrammed, still nothing. Any ideas on a fix?


I also read somewhere, that there could be a tripped “breaker” on the drivers side somewhere near the floor. Any one heard of or experienced this?

 

On the interior fuse box, below the steering wheel. Above the kick panel.
Look for a row of 30a square fuse. It is on top of the fuse panel.. pull and check each of the 4, 30a square fuse..
They look like this.
10 Pack 608830 30 Amp Micro Cartridge Fuses Micro Fuse FMM Mcase Micro Female Fuses

$13 10 Pack 608830 30 Amp Micro Cartridge Fuses Micro Fuse FMM Mcase Micro Female Fuses

https://www.amazon.com/dp/B08LYQYDY6