2020 Crewmax Sport Build

Just joined and wanted to post my build now that I am done. Bought last year. A 2020 Tundra Limited TRD Off Road Crewmax, 2 inch lift, 18x9 Fuel wheels, 285/65/18 Nitto Ridge Grappler tires, ARE topper, Diode Dynamics amber driving lights, MBRP catback exhaust, custom mudflaps, and a lot of exterior detail. I call it my sport build as I built custom boxes in the back. They hold hiking gear, a cooler, vehicle tools/straps, and have bungee tops for even more gear. Also a custom/removable bike mount for mountain bikes. Rack on top for Kayaks. Ready to go to the mountains/woods and just enjoy the outdoors.

 

I would like to see details on those storage boxes

 

Hard to provide details as I made them as I went along. What I can say is I made them from 1x12 boards, bolted them to the track system, 4 on the side and 1 at the end, and used bed liner for paint. Sorry can't be much more detailed but I measured each piece as I went as I negotiated around topper clamps etc. If you have a specific question I can try and answer it.

 

Realizing my reply was only slightly helpful, I can take inside pics, talk bolting, lid construction, etc. Just would be a lot for one post to cover every detail. Can explain each step as needed. Bottom line though you will have to measure bed length, if you have a topper, clamp locations, etc. Will not work without topper as they are not waterproof (getting inside boxes) and most covers use the rail system already. Ready to help if I can.

 

More pics would be great. Thanks!!

 

Box pics. 1x12 boards, 3 sections per box, 2 covered by lid, 1 open divided in half, 5 bolts to T rail, 4 on the side, 1 on end, 2x4 underneath wedged against tirewell for weight support, angled ends for looks, tie downs on lid for gear.

 

Some more pics

 

Thanks for the pics, that has given me some ideas.

 

Jorgy1 if you build some boxes post pics here. Would love to see what you end up doing.

 

I love the raised boxes so that a sheet of plywood can still be transported in the bed. I'll copy this idea at some point

 

Exactly...bikes fit in between, hiking gear etc from side windows, and full plywood sheets still on floor. Let me know if you end up with any questions and definitely post pics.