TRD Skid Plate installed on 3” Factory TRD Lift

Removed the TRD Skid Plate off of my wife’s 2023 Sequoia Limited TRD Off Road, and reinstalled on a 2025 factory lift Tundra.
Mod - Cut 4x6” of material off of the aluminum skid plate on either side near where sway bar mounts are located while plate was laying on the driveway. The cuts allow the skid plate to install just like a non-lifted Tundra, only after the mod you fit the plate under the sway bar. The cuts allow for the sway bar mounts and sway bar to not interfere with the skid plate during install. I used a 110v Dewalt 4.5” cutoff for the first cut, but switched to a cordless Milwaukee reciprocating say with a good metal-cutting blade, and that was much easier. Used a wire wheel on a drill to dress the cuts. I know true off roaders might want the sway bar covered, but I’m good with mod as I just wanted rock protection.

 

Appreciate the detailed pics, came out great