1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Weird steering wheel vibration

Discussion in '2.5 Gen Tundras (2014-2021)' started by phabej, Jun 16, 2025.

  1. Jun 16, 2025 at 11:04 AM
    #1
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    Long story short. I recently bought a Tundra. There's a slight shake I can't quite figure out. I have some forced wheel balance and it comes back good , all green iyn the monitor. When driving even on smooth roads it shakes a bit.. Whether acceleration or not, the a slight shake. I tried putting it in neutral as well, didn't smooth out The shake moves the steering wheel up and down. Sometimes it doesn't shake at all. I have not rotated the tires yet to see if it's changed but will when I have time.

    As for the drive shaft, it doesn't appear loose or have any loose parts.

    I might take it to a drive shaft shop next month to have them evaluate it.

    Screenshot_20250616-105825.png
     
  2. Jun 17, 2025 at 11:10 AM
    #2
    Totmacher

    Totmacher New Member

    Joined:
    Nov 21, 2020
    Member:
    #55182
    Messages:
    374
    Gender:
    Male
    First Name:
    Daniel
    West TN
    Vehicle:
    mesquite Tundra or blue 4Runner
    Some
    Is it worse around 60mph or is it the same at all speeds?
    Every time I have had steering shake like that, it was tire balance. Sometimes takes 4 or 5 trips to tire shop to get it right. Last time it was an old guy running a simple balance machine that finally got a smooth ride for me where the young people on new computerized machines could not.
     
    HulkSmurf14 and joseph_womack like this.
  3. Jun 17, 2025 at 11:45 AM
    #3
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    It's the same. Low and high speeds. I have had it wheel forced balanced two times. The second time I actually watched them do it until it said "okay" and green on the monitor.

    Maybe the weights came off.
     
  4. Jun 17, 2025 at 12:32 PM
    #4
    Totmacher

    Totmacher New Member

    Joined:
    Nov 21, 2020
    Member:
    #55182
    Messages:
    374
    Gender:
    Male
    First Name:
    Daniel
    West TN
    Vehicle:
    mesquite Tundra or blue 4Runner
    Some
    Green on machine doesn't always mean it's good.
    But if vibration feels same at all speeds, may not be balance. Not sure what it could be that isn't speed sensitive.
     
    phabej[OP] likes this.
  5. Jun 17, 2025 at 12:50 PM
    #5
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    I'll probably go back and have them rebalance it. On very smooth roads or newly paved roads there is no vibration at all, on some surfaces that is uneven or not newly paved, it definitely shakes more. PNW roads suck to be honest.
     
  6. Jun 18, 2025 at 12:48 AM
    #6
    Tundra Texan

    Tundra Texan New Member

    Joined:
    Dec 21, 2024
    Member:
    #127669
    Messages:
    1,066
    Gender:
    Male
    First Name:
    Todd
    Vehicle:
    2016 Tundra
    None at this point.
    Yeah....
    After getting my Truck back from getting the SCer and exhaust installed I have a vibration in the wheel that wasnt there when I brought it in.
    Not sure how that happened considering they had no reason to mess with the tires/rims.
    Not gonna bring it back to them,they have a huge backlog although I may give them a call and see what they say.
     
  7. Jun 18, 2025 at 2:01 AM
    #7
    Tundrav82019

    Tundrav82019 New Member

    Joined:
    Jan 5, 2025
    Member:
    #128442
    Messages:
    290
    Gender:
    Male
    First Name:
    Leo
    Vehicle:
    2019 Tundra Limited TRD Off Road
    Could be an alignment, rotors, or even something simple like not running enough PSI for wheels to factory spec. Could also have a bent wheel?
     
    HulkSmurf14 likes this.
  8. Jun 18, 2025 at 3:42 AM
    #8
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    All good points.
    - PSI, I have set it to factory PSI according to the door jam sticker, 35's all around, and 40. No difference.
    - Alignment, haven't done it, but the wheel is slightly cocked to the right
    - Rotors - no pulsating when braking but squeals in the cold morning with some humidity build up, I am looking to do pads next month and will check the rotor itself.
    - Bent wheels, I am not certain the wheels all look good, no curb rash/marks or weird bends on the inside when observing it. Could a tire shop check for bent wheels?
     
  9. Jun 18, 2025 at 4:41 AM
    #9
    BrandonL812

    BrandonL812 New Member

    Joined:
    Aug 5, 2018
    Member:
    #17783
    Messages:
    1,504
    Gender:
    Male
    First Name:
    Brandon
    Vehicle:
    2021 Tundra Platinum
    DD ss3 max led fogs. interior and exterior leds swapTRD Shift knob.
    Have you try rotating the tires? See if that changes.
     
  10. Jun 18, 2025 at 4:59 AM
    #10
    300BLK

    300BLK New Member

    Joined:
    Aug 1, 2019
    Member:
    #34022
    Messages:
    876
    Vehicle:
    2014 Tundra SR5 - Black
    Are you on stock suspension and wheels/tires? Alignment can cause those issues if yours hasn't been done in a while and the wheel is slightly cocked to the right. Worn steering rack bushings can also cause similar symptoms.
     
    phabej[OP] likes this.
  11. Jun 18, 2025 at 5:04 AM
    #11
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    Not yet, they're heavy.. :D I don't feel like doing it but I will take it to discount tires and have them rotate it, I paid for their services. And maybe do another round of forced balancing.

    Stock shocks, suspension, 67k, tires are nearly new when I bought it Michelin ltx at2 the same tires that come OE on TRD PRO (so I've read). For me to check the steering wheel bushings I will have to take off the TRD plate. I will take a look next month as I have a bunch of things I need to do maintenance wise. Thanks.
     
  12. Jun 18, 2025 at 5:07 AM
    #12
    300BLK

    300BLK New Member

    Joined:
    Aug 1, 2019
    Member:
    #34022
    Messages:
    876
    Vehicle:
    2014 Tundra SR5 - Black
    Yeah I would be surprised if it was a balance issue since those are the stock Michelin's, assuming there is no bends or cracks to the wheel. They're not a huge tire. Do you drive rough roads or recall hitting any big potholes recently? Bent wheel is possible but I wouldn't expect it from just regular daily driving.
     
  13. Jun 18, 2025 at 6:07 AM
    #13
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    nope, bought it like this. I did not hit pot holes or go on rough roads.
     
  14. Jun 18, 2025 at 6:56 AM
    #14
    Tundrav82019

    Tundrav82019 New Member

    Joined:
    Jan 5, 2025
    Member:
    #128442
    Messages:
    290
    Gender:
    Male
    First Name:
    Leo
    Vehicle:
    2019 Tundra Limited TRD Off Road
    Yes, a tire shop can check for a bent wheel if they road force balance the wheel/tire. Highly recommend that.
     
    phabej[OP] likes this.
  15. Jun 18, 2025 at 6:57 AM
    #15
    Tundrav82019

    Tundrav82019 New Member

    Joined:
    Jan 5, 2025
    Member:
    #128442
    Messages:
    290
    Gender:
    Male
    First Name:
    Leo
    Vehicle:
    2019 Tundra Limited TRD Off Road
    Also, are the wheels hubcentric? Are they aftermarket or OEM?
     
    j_supra likes this.
  16. Jun 18, 2025 at 7:14 AM
    #16
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    OEM.
     
    Tundrav82019[QUOTED] likes this.
  17. Jun 18, 2025 at 9:41 AM
    #17
    agrestic1

    agrestic1 New Member

    Joined:
    Apr 7, 2018
    Member:
    #14263
    Messages:
    450
    Gender:
    Male
    Vehicle:
    2016 CrewMax
    AMP Research PowerStep, AMP BedStep Bumper Step, BedRug Carpet Bed Mat, Bazooka Powered Subwoofer Tube
    The road force balancer should be able to check for bent wheel. Didn't see mentioned, does it still happen if the tires are rotated and force balanced ? Could the tires be bad? In the past I had 2 sets of bad tires... Few months back I had a shimmy after I rotated my tires, first shop put over 6 ounces of weights on the tires, still shimmy,, the second shop I took it to had both machines, if the regular spin didn't take take of it , then they road force them, manager drive it before and after to be sure it was done correctly. Yes it can be frustrating..
     
  18. Jun 18, 2025 at 9:50 AM
    #18
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    It definitely still happens after road force balanced. Although it was better shortly after it, but now it feels it still shimmies. Maybe the weights fell off, they did say one of them was way off! RF shows 6.02/46 vs the other like .50/36. I don't know what those numbers mean.. maybe a tire person can tell me.

    AI..


    Those numbers on the sheet relate to road force balancing, which is a more advanced method of tire balancing that simulates how the tire behaves under real driving conditions.

    Here’s a breakdown of what you’re seeing:

    • LRF, LRR, RRF, RRR: These likely stand for tire positions—Left Rear Front, Left Rear Rear, Right Rear Front, and Right Rear Rear (possibly referencing a dually setup or a trailer).
    • The first number (e.g., 0.50 oz or 6.02 oz) is probably the amount of imbalance measured in ounces. This tells the technician how much weight needs to be added to balance that tire.
    • The second and third numbers (e.g., 36, 13) could represent road force values in pounds and possibly radial runout or another diagnostic metric. Road force values above 25 lbs can cause noticeable vibration, so values like 46 or 30 might indicate a need for tire repositioning or replacement.

    Additionally, https://danthetireman.com/blog/article/what-is-road-force-balance

    If at 40 mph ((64.37 km/h) speed (or more), and your steering wheel vibrates, this means your wheel, tire, or possibly brake assembly is out of balance. This vibration is typically felt when sitting in the driver or passenger seat, or through the brake pedal. Vibration at higher speeds can also be caused by uneven tread-wear. Static imbalance makes a tire/wheel assembly vibrate up and down. Dynamic imbalance causes the assembly to shimmy from side to side. Other tire issues that can cause shaking i.e. low tire pressure, uneven worn, and near bald tires.

    Screenshot 2025-06-18 09 48 49.png
     
    Last edited: Jun 18, 2025
  19. Jun 18, 2025 at 12:42 PM
    #19
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    New numbers. Found a problem with the rear driver.

    Test driving it.

    PXL_20250618_193458034.MP~2.jpg
     
    HulkSmurf14 likes this.
  20. Jun 18, 2025 at 12:50 PM
    #20
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    So much better! Not Cadillac smooth but better. At least no more shaking steering wheel. Body still shakes a little bit but that's probably the suspension
     
    300BLK, HulkSmurf14 and Red&03Taco like this.
  21. Jun 18, 2025 at 9:48 PM
    #21
    Tundrav82019

    Tundrav82019 New Member

    Joined:
    Jan 5, 2025
    Member:
    #128442
    Messages:
    290
    Gender:
    Male
    First Name:
    Leo
    Vehicle:
    2019 Tundra Limited TRD Off Road
    I had a heck of a time with a vibration issue. They said the wheels were fine. I changed wheels and problem went away. But mine were aftermarket. Psi helped a lot too. Happy your on your way to figuring this all out!
     
    phabej[OP] likes this.
  22. Jun 19, 2025 at 4:18 AM
    #22
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    .

    It took three visits. Each time the numbers were different. That's so strange. Let's see how long this will last.

    I also requested they rotate the tires.
     
  23. Jun 19, 2025 at 5:23 AM
    #23
    agrestic1

    agrestic1 New Member

    Joined:
    Apr 7, 2018
    Member:
    #14263
    Messages:
    450
    Gender:
    Male
    Vehicle:
    2016 CrewMax
    AMP Research PowerStep, AMP BedStep Bumper Step, BedRug Carpet Bed Mat, Bazooka Powered Subwoofer Tube
    The road force machine is only as good as the operator knowing how to use it. Especially if the tire and rim have to be force matched..where the tire is matched to the rim, by dismounting the tire , and rotating the rim to the proper match mark. This takes time, and I believe many shops won't do it..Time is money. I'd pay extra if needed,but many would not...https://youtu.be/iXHKvLvrw-g?si=6XfA1go4GkHFSFCG
     
    Tundrav82019 likes this.
  24. Jun 19, 2025 at 6:11 AM
    #24
    Totmacher

    Totmacher New Member

    Joined:
    Nov 21, 2020
    Member:
    #55182
    Messages:
    374
    Gender:
    Male
    First Name:
    Daniel
    West TN
    Vehicle:
    mesquite Tundra or blue 4Runner
    Some
    If you had tires done at a big chain type shop, try a different location. That way you get different operator on different machine from last time. Tell them up front that other location tried to balance but you still have vibration through steering wheel.

    My 4runner shakes a bit sometimes when tires are cold, after being parked overnight or longer. Usually it gets better after 5-10 miles. A rebalanced makes it better for a while now that I found a shop to do ok job at it.
     
  25. Jun 19, 2025 at 7:22 AM
    #25
    Tundrav82019

    Tundrav82019 New Member

    Joined:
    Jan 5, 2025
    Member:
    #128442
    Messages:
    290
    Gender:
    Male
    First Name:
    Leo
    Vehicle:
    2019 Tundra Limited TRD Off Road
    Sometimes tires like E rated ones can get flat spots in the AM from sitting and go away with use.

    I hope it all gets better. Sometimes it’s just the tire. Our trucks can be sensitive to any changes from what the engineers developed, especially going from a highway tire to an all terrain.

    I had good luck with falken wild peaks.
     
    phabej[QUOTED][OP] and 300BLK like this.
  26. Jun 19, 2025 at 7:23 AM
    #26
    Tundrav82019

    Tundrav82019 New Member

    Joined:
    Jan 5, 2025
    Member:
    #128442
    Messages:
    290
    Gender:
    Male
    First Name:
    Leo
    Vehicle:
    2019 Tundra Limited TRD Off Road
    This comment here is accurate.

    it’s not totally abnormal too to have different numbers every time they spin them. Ensure to make sure the cold PSI is within specs first thing in AM too.
     
  27. Jun 19, 2025 at 8:27 AM
    #27
    300BLK

    300BLK New Member

    Joined:
    Aug 1, 2019
    Member:
    #34022
    Messages:
    876
    Vehicle:
    2014 Tundra SR5 - Black
    Glad it seems to have been resolved. If you still have a very mild occasional vibration I would also do a quick inspection of your U joints and carrier bearing. My center U joint went out and I recently replaced it and the carrier bearing. I had always had a slight vibration in the wheel at around 50-55mph for a while. Its gone now. I think it had been worn for a while and was contributing to the vibration until it completely failed.
     
  28. Jun 19, 2025 at 8:35 AM
    #28
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    I did go under and tried to see if the drive shaft or u-joint was loose. They're very tight. No play at all.

    It doesn't really vibrate at only 50 and 55. It vibrates the second I start the car down my street. You can feel it shimmy shaking side to side. But after the last tire rotation and Force balance it seemed to be gone.
     
  29. Jun 19, 2025 at 8:47 AM
    #29
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    I went to two different shops total. The second time around I went to the same shop that did the previous which helped a little bit. First it was the right passenger that was off, this time it was the driver that was off.

    The only vibration left is from the suspension being kind of hard. We hit bumps or uneven roads. Then you feel the shake in the truck not in the steering wheel. But it's a truck. Only way to get a softer ride is upgraded to the eibach from what some users on this form is telling me.
     
  30. Jun 19, 2025 at 10:36 AM
    #30
    phabej

    phabej [OP] New Member

    Joined:
    Oct 22, 2018
    Member:
    #20840
    Messages:
    1,240
    Washington
    Vehicle:
    2018 Platnium
    I'm certainly glad it's nothing worse than the tires. Other stuff will cost a lot of money to fix. So unfortunately I don't have spare sets of tires or wheels to test out. But it's good that it's just a balance issue. I would hate to chase after dry shaft or transmission problems.
     

Products Discussed in

To Top