Siblue’s 22 TRD O/R and 25 TRD pro

I tapped in to existing bed led wires. Not sure if you your truck is already equipped with them.

 

Mudbath grows on me more and more everyday, maybe its time I wrap my truck hahaha.

 

Don’t know why I just realized this - are all the interior lights and switches white now with the ‘25??

 

They are

 

@Charvonia Design rail end caps.
They are printed to match the TRD pro camo

 

Using 2 of these eBay switches for now.
No aftermarket has caught up with white backlighting yet but the aqua blue is minimal with no logo.
They are momentary push buttons but they are latching until you press the button again.

 

OEM AUX switches

 

Added LC250 fog switch to the line up and mocked up the panel. All new NOT “OEM style” switches have white backlight.
Still need to find harnesses and AUX/Fog sw pin outs.

Repurposed useless blank to house the steering wheel heater switch and removed Auto lights and will hide behind the panel.

 

OEM Front recovery aka tow hooks done today





Filling the TRD with some red paint.

 

Well done. Now there’s some useful switches there!

 

OEM part numbers for switches for few people who view this thread

PT45A-60940-C0 LC fog switch
88485-AK010 AUX1
88485-AK020 AUX2
88485-AK030 AUX3


Purchased three different 90980-12C7x connectors and pins from Aliexpress

 

OEM switches done

AUX 1 and 2 wired constant 12V
Fog and AUX 3 wired accessory

 

Did you find out the part numbers for the white lights for the ambient?

I'm not seeing them on the parts fiche yet.

 

Ordered a few different part numbers without any reference or descriptions. They have been back ordered for months with no ETA.
(2) 81080-AN010 only PN I’ve received
I ended up using the white LED cores from these clear lens modules and swapped for the light blue to complete the dash ambient lighting.


81080-AN010 clear lens
81080-AN020
81080-AN030 left dash
81080-AN040 right dash
81080-AN050 (25 Sequoia)
81080-AN060 RF door panel
81080-AN070 diffused Front door LH,RH (2 male-1 female harness included)
81080-AN090 LF door panel
81080-AN100 diffused Rear door LH,RH (2 male-1 female harness included)
81080-AN110 RR door panel
81080-AN120 LR door panel

 

I was going to pull the lower footwell to see what the part number was for those bulbs.

Right now my doors are blue and footwells are white.

 

Still waiting on AN020
But all the rest are White LED
No clue where AN050 goes

 

AI Overview


+1
The part number 81080-AN050 is for a 2025 Toyota Sequoia Light Bar. It's an OEM (Original Equipment Manufacturer) part. The light bar is located in the front center of the vehicle. It's also sometimes referred to as a "Courtesy Light" or "Lamp Assembly Interior". The part is warranted for 12 months from the date of purchase

 

Got the ambient stuff wired up in my Limited.
Still the blue for now though.

 

Did I miss it? Did you ever mount the SCS wheels?

 

I ended up selling them. Was not ok with the poke from that offset.

 

Updated post 134 since Toyota doesn’t include detailed descriptions.
Gambled on buying all of them and ended up not needing the xxx50

 

Wish Toyota would put the heated steering button where the USB port is on the climate controls and then the USB in the center console.

Let's see if they update anything on the 2026 model in terms of all of that. Doubtful, but hopeful.

 

26 needs USB C audio port. I believe Tundra is the last Toyota model still using USB A not including Lexus IS

 

2026 Camry has USB-A.

 

Not even sure what model these are from.
OEM momentary switches labeled cooler, freezer, and vacuum





Now the part number populates with more info. All 3 comes up as Sienna switches

 

the new high end sienna has a built in fridge and vacuum if i recall

 

100% Sienna.

 

Is there no way to do a simple swap from usb-a to c there?

 

There is not. There are three additional pins on the USB-C that the USB-A (nor a headunit from say a MY22+ Tundra) put out. There are a few of us working on it behind the scenes to be able to adapt the USB-C in for even say a 2020/2021 Tundra.

 

Added my door panel ambient LEDs to driver sides. I’ll eventually get the passenger front and rear. Rear is white, fronts are just overexposed with MESO courtesy ON



Fronts with MESO with red selected