Looking to install 37s on my tundra

I have a 2012 tundra with 5112 level and freedom off-road road im currently running 35/12.5 r17 on the stock RW wheels no BMC I want to run 37s I was told they will fit if I remove the front sway bar if I do that how would that effect the daily drive ability

 

Welcome from LA (Lower Alabama)! Try asking this in the Wheels & Tires forum.

 

You need to read this sticky thread >>>> https://www.tundras.com/threads/largest-tire-you-can-run-stock-for-all-generations.9762/

 

I’ve had mine off for years. You do feel a little more body roll, but nothing unmanageable IMO. I had to slam on the breaks at about 60mph in response to the jacknut in front of me doing the same, and it didn’t feel too awful. I just don’t drive like an eedjut anymore, so I’m happy. Because it’s not hard to remove and reinstall, you could always take it off, drive around for a few weeks, and judge for yourself.

LOTS of members on this forum have removed their front sway bars. Also, you get a little gain in suspension articulation.

 

Punctuation saves lives

 

There’s only a specific 37 that runs with no bmc no lift, per tinkers adventure https://youtu.be/Q7MyN1qOFgs

Lifting doesn’t really help in this regard (without a bunch of other work). I have done 35s no lift no bmc and that definitely works with 12.5” wides, but you already do that. 37x12.5” would likely not work as-is. Removing swaybar is all good just don’t tell the swaybar police.

 

here is a good video from R4T. I would do a cab mount relocate for 37's if you do a lot of trails.

 

Thank you all I really appreciate all your help

 

Welcome from NY.