Sensor recalibration after Gen3 TRD Pro Heritage grille conversion

Hi folks,

Long time looker first time poster. Hoping to get some internet wisdom. I have a 2025 Platinum and am looking to do a TRD Pro Heritage grille conversion. So far, I have the following:

- OEM TRD Pro Heritage Grille (PN: 53101-0C220)
- OEM Marker Lights (PN: PT358-34220-AB)
- Rave off Road 2022+ Tundra OEM TRD Pro Marker Lights Wire Harness
- Westcott Designs 2022-’24 Toyota Tundra & Sequoia Front Camera Relocation Bracket

(I am still debating between the Baja Designs S8 Light Bar Kit vs. Leaving this spot blank)

I came to realize that I am not sure if all systems such as 360 camera, cruise control, pre-collision, etc. will work as expected after the conversion or is some sort of recalibration needed?

Can those of you who have gone through the process share some insight here please?

 

After changing my 24 Platinum grill to the Heritage grill I didn’t experience any issues with my sensors. I wouldn’t worry about it.

 

I changed my 24 limited to Pro grille, and leveled the front end & larger tires. Nothing needed as far as recalibration on mine, i also have 360 cameras & everything works as it should.

 

If you get the diode dynamics light bar, you get a free camera relocation bracket. Just another option for you..

I just did this conversion on my Platinum and there were no issues with the sensors, but my grille camera mysteriously failed 3 weeks later (replaced and recalibrated under warranty).

 

No issues with sensors so long as you remember to plug in everything when it's all done.
You may just have to align the front camera on the new bracket.