Tired of bad phone mounts

Tired of phone mounts which ones you guys going with?
Looking at rago or the one from Amazon
Need some pointers please!

 

I went with ICS and it's absolutely rock solid. Never once has to adjust it. I like it better than rago because it's easier to access under the mount to add more accessories without removing the mounting plate and I can still use the area for putting things in.

 

Do you have a link?

 

https://www.ics-fab.com/products/tu...LAXRghuo43Mp2nEBfoEAYbVnqShcmjQ5RF9qC2F2E-rP3

I went with the support plate too and I don't regret it. Although, seeing the price difference nowadays, I'd consider getting a scrap aluminum plate and making my own. Don't need to be pretty, you'll never see it.

 

I've been using a proclip in each of my vehicles for several years now. It's a little pricy, but rock solid. In essence you'll need to order two pieces, one piece is the custom designed mount for your Tundra center dash and the other piece is a custom designed holder for your particular phone. The two pieces mount together into one unit. https://www.proclipusa.com/

 

I have this and i like it real well. Can’t fully close the vent but it will shut bout 85%.
https://a.co/d/jcXWxao

 

Buy once, cry once:

$80 Offroam Phone Mount Made for Toyota Tacoma (2016-2023)

https://www.amazon.com/dp/B09DWKS5BX
Offroam phone mount (I bought the Tacoma one, worked great on my tundra vent).

Best phone mount I've ever seen/used.
Super solid, no movement whatsoever.
Easy placement and removal.
100% solid aluminum, no plastic junk.
Spring action on the jaw sliders.
Fits multiple sizes phones due to sliding jaws.
Love it so much I bought another to use in my wife's Subaru.
10/10 would buy again.

 

Absolutely love the ProClip with Scosche MagSafe mount!

 

Proclip on top can be used with phone. RAM on bottom has been good. Little rubber pieces work themselves off.

 

I've had nothing but vibrations with the vent mounts. I can't recommend them.

 

I swore off vent phone mounts after my phone overheated one time from the heater.

 

Another vote for Proclip. Keeps the phone out of your field of vision. Great adjustability of viewing angle. Zero function loss of the vent and with a iOmount from Klockwerks there is zero vibration. Like them so much my new Tundra is the fourth vehicle I have put them in. Not the cheapest but imo the best.

https://getklocked.com/products/iomounts-universal-magnetic-phone-mount

 

Got any details on which Scosche you used? There's so many on their site.

 

I have the Rago mount with the ics backing plate and tackform mounts. Works great for my purposes and very secure

 

I've tried multiple different mounts, and there's something I hated about all of them... I'm pretty dang happy with this little cheapo! Like $14 for a 2-pack on Amazon.

I've bombed down some washes in the desert pretty good and it stays put, the only time it falls off is if I accidentally hit the edge of the phone.

This is with the metal piece for the magnet inside my phone case, it would hold stronger if I stuck it to the outside of the case.

 

I ordered all my bits through proclip, but here's the info on the scosche I use. https://www.scosche.com/mp2-mm-pro2 Works great!!

 

RAGO with the ICS support plate and mounts:

 

Second the buy once , cry once approach. Had good luck with OFFROAM mounts

 

Do you have to pull
The entire head unit to install this?

 

I would like to have the starlink mini mount to
This

 

Installed the Rago last week and I like it so far. About to take a week long off-road trip so I'll let you know if that changes. We use RAM 1" ball components and this Amazon Mag mount is amazing so far. I have an iPhone 16 pro with a very minimal case.

$20 Super Magnetic Cell Phone Holder Base with 1" Ball for MagSafe iPhone 15 14 13 12 Series,Compatible with RAM mounts and Other B Size Ball Double Socket Arm

https://www.amazon.com/dp/B0CNGDPB4S

 

Yes but you can leave it wired up, at least I did. Pretty easy to do, just use a plastic trim tool and a zip tie to keep the HU from falling down and stressing wires.

 

I guess at that point it would be worth switching it out to get Apple car play..

 

Also a good time to add front anytime camera.

 

for sure. My superduty front camera is so nice. You don’t realize what you’re missing until you don’t have one

 

Yup, couldn't live without it now.

 

https://www.tundras.com/threads/diy-hidden-invisible-phone-mount.12908/

 

I had the same problem.

I went with Rago because I liked the look better, the combined that with a MagSafe charger. I am currently using the otter box head on a ram arm and with the right case it stays locked in tight even over the roughest terrain.

 

@JMGmanAZ Where did you get the ICS supporg plate?

Thanks