What have you done to your 2.5 gen Tundra today?

Been there man.
Doesn't matter the vehicle brand either, I've been sliced and diced several times

 

New to me 2020 1794 low miles minty. Adding Slee sliders; here are before and after. Able to do it all myself on soft ground and without experience or good tools. Next up some BP51s, bronze icons, 34s. Maybe some Nacho lights...

 

Hooked up the camper to take it to the RV shop for inspection tomorrow. I’m keeping my fingers crossed.

 

Your garage looks like mine. Outside with no roof, in the weather.

 

If you want to swap out the amp rack for something else, this one is under my passenger seat and is currently holding a vx1000, power distribution block and the factory amp (soon to be swapped for a 4ch Morel).

 

Panda Express lol

 

Back when the truck had forwards gears too.

 

This guy here caught up on forward gears just wheels the malls lol

 

Is your heart set on the Bp51s? When it comes time for a rebuild you have to send them into ARB. I couldn’t find a local shop in socal that would touch them. ARB does it for free, which is nice, but your truck will be down for close to a month. Any of the other big name suspensions can be rebuilt in a local shop in a day or two. Just food for thought..

 

Which Icons are you planning to go with?

 

It was time for a new engine air filter so went for the K&N washable filter as the replacement. It's dusty here in Texas so I figure cleaning the engine and cabin filter (also K&N washable) every oil change is easy and helps with the dust in the air.

 

Catch can install. Normally I wouldn’t use one but since I’m turboed now figured it couldn’t hurt.

 

Way overkill. You can go two years easy before needing to clean them.

 

I figured it would give me something to do while I drink beer and wait for the oil to drain.

 

Don’t forget the dry time of the filters. They can take a long time to dry fully after washing and then the time to let the oil absorb into the media.

 

That is why I have two filters....

 

Much obliged, picked up a second one today.

 

Get some good tools….they’ll help with getting experience.

 

Just replaced my AT3’s with AT4’s. Got 87,000 miles out of the AT3’s, and could have gotten more. Hope the AT4’s do as well.

 

That's some serious mileage!!

 

2019 Limited CM 4x4
Got my 5” lift installed to show off the new Black Rhino 17” Armory wheels and LT285/75R17 NEXXEN ATX tires!
Painted the tow rings Gloss Popsicle Orange.
THEN, I lowered it to a 3.5” lift. It just made it easier to access the kayak racks and truck bed.

Loving it!

 

Drove it to pull the camper back from Disney Fort Wilderness. It needs a wash or two.

 

I am sure you do too! Hopefully it all went great! I just paid for my April trip to North GA

 

Is it lovebug season down there yet?

 

That appears to have a perfect shape for fitting in that area nicely!!!!

Thank you for the recommendation... ordered

 

Not yet but it won't be long.

 

Saw this on the first morning in the campground.

 

GOBBLE GOBBLE
Turkey season starts tomorrow in Alabama

 

Where did you find the polished option? Don’t see that on SCS website.

 

Did truck stuff this weekend. Picked up a full pallet and a few more of 8x8x16 concrete blocks. Tundra didn't even flinch with the weight. I, on the other hand, am still a little sore from unloading them.