TRD Pro Stock Suspension - Rim 17x9.5 Offset -18

I am considering to change the rim under the factory suspension

17x9.5, Offset -18

Will it be too aggresive and cause any rub?

Any idea?

 

I know 17x9, -12 is okay...

 

Tire size? I’m currently running 17x8.5 0 offset with 35” ko2s. Had a spacer lift of about 1.5-2” previously. Bought the truck with 33s and it didn’t rub until I put 35s on. Then I trimmed a bit of the fender liner and most of the rubbing went away but it still barely rubbed at full lock against the horn of the frame. I then swapped to aftermarket UCAs for better caster, but now it rubs a little bit more on the horn. If you’re going to run stock tire size, it probably won’t rub a ton as long as you remove the bracket behind the fender liner closer to the cab. Hopefully someone else with a pro can help. If not, I’d try to mock up a spacer that’d push your current wheel out to where a -18 offset wheel would sit.

 

Tire size will be my next question: can I still put 35 on this rim? if not, what's the max size without any rubbing?