1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need new Lower Control Arms

Discussion in 'Suspension' started by Hookedontronics, Jan 29, 2025.

  1. Jan 29, 2025 at 6:28 AM
    #1
    Hookedontronics

    Hookedontronics [OP] New Member

    Joined:
    Sep 8, 2015
    Member:
    #1785
    Messages:
    10
    Gender:
    Male
    First Name:
    JAKE
    Vehicle:
    2016 MGM Crewmax Offroad
    2016 Crewmax 4WD, 62kmi

    Well, like so many other users here the time has come and my lower control arm bolts are seized prohibiting me from getting an alignment. Kind of frustrating considering i just put over 3k in my truck with new shocks, UCAs, shackles, leaf spring bushings etc and just had it all torn apart but it is what it is and still better than a new truck payment IMO.

    I already ordered new oem Bolts/Hardware from yotashop, and i've looked into getting some bushings to replace them in the existing arms but the consensus seems that all bushing available are just not as good as OEM. So considering oem bushings are about 200 a side, i figure i should just get new lower control arms and that way i'll get a new ball joint as well.

    TLDR: Where is the best place to order new OEM lower control arms, or if there are any vendors on here please chime in or reach out to me. Thanks
     
  2. Jan 30, 2025 at 8:58 AM
    #2
    kos221

    kos221 New Member

    Joined:
    Jan 14, 2022
    Member:
    #73117
    Messages:
    56
    Vehicle:
    2007 4X4 DC
    I ordered mine from Serra Toyota in Birmingham AL. Super nice folks in the parts department. There was a deal in December and I got the right and left side for less than $500. They were very well packaged. They currently have free shipping and would cost about $625 for the pair delivered to you. Sill cheaper than my local dealer if I pick it up from them.
     
  3. Jan 30, 2025 at 2:25 PM
    #3
    Jwood562

    Jwood562 New Member

    Joined:
    May 29, 2019
    Member:
    #31174
    Messages:
    941
    Gender:
    Male
    Vehicle:
    2013 Tundra 4x4
    3" Suspension lift 18" method roost 35x12.5x18 ridge grapplers 2020 sequoia LED headlights
    I took a different route.

    I bought some dirt cheap used lowers and going to attempt to clean up, press out bushings and replace with polyurethane.

    I am only about $150 in to. But haven’t tried to press out/in the bushings yet

    I might even get them powder coated if my local shop can do it for about $100
     
  4. Feb 13, 2025 at 8:52 AM
    #4
    Hookedontronics

    Hookedontronics [OP] New Member

    Joined:
    Sep 8, 2015
    Member:
    #1785
    Messages:
    10
    Gender:
    Male
    First Name:
    JAKE
    Vehicle:
    2016 MGM Crewmax Offroad
    ended up lucking out. all bushings were still good they were just on there really really tight. Took my truck home from the alignment shop, loosened them all up and brought it back
     
    SAGE63 likes this.

Products Discussed in

To Top