Leveling suggestions

Im a new member and would like suggestions to level the front end of my new 2025 Tundra TRD. I don't do any hauling as in a boat or trailer, just want to get an aggressive look and maybe later bigger tires.Any help would be appreciated. Picture of truck

 

I put the Fox 2.0 leveling coil overs on my truck and I love it. Rides better than stock and will suck up the bumps! I also did the corn feed 1” spacer in the back. I like the look.

 

The coil overs are out of my budget. Was thinking 2’ on the front.

 

I understand the budget thing and the coil overs are expensive but I think they are worth it.

 

Looks good.

 

That looks great. Well done

 

Just need some bigger tires! Thanks

 

2 foot level is going to require a lot more than coil overs.

 

I did the cornfed 1/4" shims and mines perfect for me. Put the 1/2" shims previously and thought the front was a tad too high.

 

Worth a look if going with a spacer.
https://youtu.be/0L3bMDRVSx4?si=7Z2ddZgYVObkQK7c

I have a set of Vertex coilovers on the front, I did not want to cut the studs on the stock units and also felt the coilovers would keep ride quality or improve; it improved significantly.

 

This is my ride with Vertex coilovers, sits completely level.

 

Just installed Eibach with factory springs on my 2018. They make them for Gen3 too, and same price at $300 for two. Here is the lift they give for your Gen 3 depending on perch positioned at. Pretty easy to do if you have tools and rent a strut spring compressor.

 

I use a Rough Country 1.75" level on front of my limited & it made the front and rear even. Rides like stock. Of course I added bigger tires as well.

 

Looks great did you use the spacers that go on top of the shock?

 

Love that color, was my second pick. The Inifiniti I gave to my son is that color.

 

Do you just have coilovers in the front? Are they these or similar? They seem kinda pricey for what they are, esp since it's just the front. Did you add aftermarked UCAs too?

 

Yes, those are the coilovers I installed, $1,404 all said and done. I did not change out the control arms, didn't see a need to. I went with the preloaded height and after about two weeks there were right on the money. I also got the front aligned after I put them on.

I plan to install these on the rear, will get to that in Spring.
https://www.roughcountry.com/product/toyota-vertex-shocks-699049

 

Nice looking ride. . What wheels are those?

 

https://rimzoneonline.com/catalog/p...f6-4-terra-bronze-22x9.5-20mm-6x139.7-(6x5.5)