Camper cap attachment help

Yo! Anyone have a good method to repair this or where I could find a replacement for it since it's bent. Plan is to put a camper shell on it within the next month or so.

Thanks for the help!

 

I think but might be totally wrong, that's part #65519-0C010 Track Assembly Bracket. How is it attached in there, welded? I'd wrap some rags and tape around a long crowbar to avoid scratching/gouging as much as possible, stick it down in and see if you can get enough leverage on it to bend it back to normal.

 

Additional to what you say is cut down a 2x4 to size(use a undamaged stake pocket to measure) and smack it down the hole with a hammer. Wiggle it out...should be good to go.

 

Thanks you guys - going to give both methods a go tomorrow. I appreciate the help!

 

Also sorry if I wasn’t clear with “crowbar”, I meant something like a ~3’ flooring/wrecking bar