What Wheels?

Any wheel company out there that makes close to a factory speck wheel as far as offset? I want new wheels but no poke . I’ve just picked up another tundra, 14 SR5 , any help or ideas would be great , RC 2” leveled coilovers 295/70/18 Mickey Thompsons with no rubbing , should be a fun project, just swapped all white lights to LEDs , looking for some wheel ideas now.

 

Hello SC SR5,

Check out SCS wheels :


https://www.tundras.com/threads/scs-ray10-wheels-18x9.26374/


https://www.tundras.com/threads/scs-sr8-wheels-18x9.11013/#post-187912


https://www.tundras.com/threads/scs-f5-wheels-18x9.120743/



You can email me if you have any fitment questions: vuth@scs-performance.com

 

Few 18 inch wheels that are close to stock offset. Stock offset is +60.

Most aftermarket wheels, 18 inch for Tundra are +18 or +25.

There are a few choices in 18 inch that are +40 or +45, which is close to stock and will not poke the tires. Method wheels makes some in the +40 range, either in black or bronze.

If you want to keep stock offset, a set of the TRD Off road wheels would look good, or if you want all black, then the TRD Pro wheels.

 

Agreed. If you don’t want poke, and are going to do a 2” level, I would go with the Pro wheels and 295/70’s. You will need a small spacer since it will rub on the sway bar. I did a 3/8” spacer and 295’s. No rubbing at all with very little if any poke. Was a great set up.

 

If you want pro wheels, I just took mine off of my 21 and have the 295/70 ridge grapplers and the spacer. Hit me up.

 

I'm going through a similar search / effort. You may find this useful.

https://www.tundras.com/threads/gen...-long-time-listener-first-time-caller.152823/

 

Does anyone have the Method 318 mounted on their truck that can share a picture

 

Method 318 | Toyota Tundra Forum