Capstone All Terrain Tires/Lifts

I know there was a thread on this back in 2022 but no pictures were uploaded so I’m starting this up again.

I just bought a capstone and I’m looking at putting the 2” ready lift kit on it. Readylift claims 34” is the biggest tire that will fit with the lift. I think the 2” height is exactly what I want, but I’m afraid the 22” wheels are going to be too big on a 34” All Terrain tire.

I know I can go to a 3” lift with 35’s - and will probably have to end up doing that. But I think the 2” lift gives me the subtle look I want.

Does anyone have pics of Capstone rims/tires/lifts? There’s only a few on the internet and only a couple note tire and lift size.

 

Be prepared to do a lot of trimming/cutting on factory rims if you go,to 35” tires, even with a 3” lift. I got a 3.5” lift and 35x11.5 tires and mine still rubs on the sway bar at full lock with factory rims.

 

Just get a set of take off 18" Trd pro wheels, put 34 inch tires on them 305/65/18, 285/70/18 P or C load range...no lift no rubbing, no f'ing up stock suspension. It will look killer and ride and drive better than ridiculous stock 22's.

 

I have the same trim as you I put on Yokohama Geolanders G003 @ 285/55R22.
If you have AVS then the 3" lift is not compatible I was talking with Dave at Cornfed.com they were making prototypes that were compatible with AVS but I think the height limitations were maxed at 2" maybe it's changed in the past year and a half but I don't know.
I ended up doing no lift or leveling and with no shaving or pinning back anything the the wheel wells with no rubbing at full lock in either direction.
Here's the true dimensions of original tires and what I put on 34.75" at 11.22".

 

Beautiful! I have AVS. Readylift makes a 2" lift for AVS that says it fits up to 34" tires. This is probably what I will end up using: https://www.readylift.com/2-sst-lif...IwubrCrfAlgIR6uTJDZfkGXHVlF-PadcaAsMuEALw_wcB

Thanks for the pics. This is exactly what I was looking for.

 

All the best and welcome to the boards from MA.
When your all done with it definitely post up some pics.

 

Will do man.

 

Picked up the Tundra tonignt! Couldn't be happier with it! I will upload some more pictures in the daylight tomorrow. Thanks for the help!
Falken Widlpeak RT0/1 285/55r22
Readylift 2" lift for AVS.

 

Here are some before and after pictures:

 

Looks better with the increased side wall looks great man!

 

Thanks! Also no rubbing and I didn't have to trim anything!