'22 or '23 TRD Pro with 295-70-18 on stock 18" wheels

Just wondering if anyone has tried 295-70-18 on the stock 18" wheels on a '22 or '23 TRD Pro with no lift and if they clear or not.

 

Open Country at3. 295/70/18. No issues

 

Awesome, thanks for the reply, tires look very sharp!

I also saw a youtube video recently of somebody with 35 X 12.5s, they just barely rub on the inside edge of the front mudflaps, so the 295s being 1" narrower are the better choice I think.

 

Yeah I thought about the 35’s but didn’t.

Open country 295 sit at 34.3 - 11.8

they are a perfect fit. No rubbing and no mods.

 

Anyone else toss on a 295/70/18 on stock TRD pro set up?

if so what tire did you go with and a pic too

I am wanting to snag that size when mine comes in and last thing I want is it to rub at full lock.

 

Also following!

 

These look awesome, on the fence between these or Mickey Thompson Baja Boss in 295/70/18

 

This is exactly why im getting the 295, im assuming the Spedo will be less off as well..?
I am waiting to put my 295/70/18s Mickey Thompson Baja Boss AT on, ill post a picture when I do!

 

I just installed 35x12.5 ko2s on my Trd pro on stock wheels and stock suspension. Actual diameter is 34.5”. 295/70/18 should fit no problem.

 

Same question, anyone try the Falken AT4s?I have a set on order at 295/70/18 onto OEM 2024 TRD PRO rims. Just double checking they fit without spacers. I know a guy that used a 1inch spacer, but I'm hoping not to use a spacer for these specific tires or have any modifications.

 

At4 fit and zero rub.

Anyone try clearing parkades that say 6'8"? I had a tough time measuring the height with fin but I think the trd pro sits at just a hair under 6'8" with 295/70/18?

 

You should not have a problem. Stock 24 trd pro clears 6’6” ASSUMING the entrance is flat and no decline. If you hit a decline, your shark fin will touch or even canopy if you have one

 

For me, in a 24 Toyota trd pro, I am getting TINY rub on both driver/passenger inner mud flap during turns. NOT on full lock. All stock suspension and rims.

 

Good to know. Most entrances are decline where I am at. I won't try it then.

 

Did you get a realignment? I got one during install. I read somewhere another guy didn't get alignment and when he did it fixed any minor rub. I'll double check again. I swear I had no rub when I tested it a few weeks ago.

I also just changed my mud flaps. These wider tires are spraying dirt and rain all over my sides with stock flaps.

 

I did not get an alignment. I should not need one, as for the aftermarket flaps… something for me to consider. I hesitate remove the existing because to me, doing so would make it look off….

 

Rokblokz mud flaps. Clean look, doesn't look after market. I got all black and most won't know it's after market cause I didn't get any fancy colours.

 

any rubbing? on full lock reverse? thanks gents..

keep them coming. in the market for tires.