HVAC Trouble Code 41

Started my 2011 Platinum, with auto climate controls last week and the blank control panel issue occurred. By the time I had driven across the parking lot the system kicked on and defaulted to 75 degrees. I performed the diagnostic self test and it came back with CODE 41. I'm assuming based off B1441/41 Air Mix Damper Control Servo Motor Circuit (Passenger Side) - Air mix control servo motor fault code that this is on the passenger side of the vehicle but cannot find any info relating to part numbers or installation. I can find all kinds of info for the what appears to be the issue on the driver servo motors.

 

ever find anything on this? having the same issue and code on my 07 DC. passenger side doesn't get any cold air/heat.

 

I’m betting it’s the dual servo blend door actuator on the drivers side. Not a fun or cheap job unless you do it yourself. The part is less than $200, but the labor can be extensive. Several videos on YouTube. I’ve already done mine. Good Luck

 

Can this be replaced WITHOUT taking the whole blend door assembly apart? Can I just pop out the actuator and put a new actuator in?