Turning Radius Post Lift

This is @ full lock ^



Hello!

I had a Dobinson's IMS lift w/ Icon Billet UCA's installed Monday on my Tundra. On the drive home I noticed my turning radius was significantly impacted. I expected it to change - but not this much. Did some inspecting and noticed the steering stop contact point is much higher than it should be as you can see from the chipping.

Probably a loaded question but can anything be done about this? They did drop my sway bar - is this the culprit?



Very happy how it turned out, just finding it hard to park now haha. Worried it will keep chipping away as well if not handled. Saw some threads of some guys grinding it down, but curious if there is another way.

Thanks in advance!

 

Posted in different thread for more visibility - please delete!

 

Hey Reef2018! By any chance, were you able to fix your turning radius issue? I had the ICON 6" Lift Stage 2 Suspension kit installed on my 2024 Tundra Platinum and my turning radius decreased significantly so I was wondering if you were able to fix the issue. Any info will be greatly appreciated.

 

Not completely. The shop who did my lift, lifted it a little bit too high so I took it in and had it dropped in the front about 3/4” which helped out a lot. The only other option I came across was to grind down your steering stops which I opted to not do.

 

Thank you for the response. I'll look into dropping the front ands see how it improves.