Liftgate Window

Hi everyone. I have a 2010 sequoia with a liftgate window problem. A few weeks ago, I put the window down and it wouldn't come up. I found that the regulator had rusted through on the one side. After replacing the regulator this weekend, I can't get the window to move up or down, I did check for voltage at the regulator motor connector and there is none. For what it's worth, the window was in the full down position when it failed and the new regulator was about the middle position when I installed it. I don't know if the window position needs reset to learn the new position. I did disconnect the positive and negative terminals on the battery, shorted them together and let it sit about 30 minutes before hooking back up without any luck. All fuses are good. I have googled and searched forums about this situation with no results. Any help/guidance would be greatly appreciated. Thanks in advance!