1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Park / Neutral Shifter Switch Wiring

Discussion in '2.5 Gen Tundras (2014-2021)' started by brandostundra, Sep 15, 2024.

  1. Sep 15, 2024 at 5:10 PM
    #1
    brandostundra

    brandostundra [OP] New Member

    Joined:
    May 11, 2020
    Member:
    #46434
    Messages:
    162
    Gender:
    Male
    I am still considering running a kill switch on my 2016 Tundra and weighing options.
    I read that an easy location to tap into would be one of the wires on the shifter (park/neutral switch) .
    Where if the hidden on/off switch was activated , and someone went to turn the key , the relay wouldnt get signal to turn on because that wire was interupted (switch) , so no power to the starter because it thinks its not in park or neutral.

    Out of curiosity, I opened the top of my console exposing the shifter, but didnt see any wires coming or going to it. So my question is , is there a small wire harness on or under the shifter somewhere? or is it under the truck on the side of the transmission ? and any idea on wire color?


    2016 Tundra 5.7 4x4 Limited with floor shifter
     
    Last edited: Sep 16, 2024

Products Discussed in

To Top