What have you done to your 2.5 gen Tundra today?

Well I did the TRD air flow accelerator thing. We'll see what happens this weekend on my drive to Connecticut to help my daughter finally start the move back south where she belongs.

 

Where are you going to be at in CT? You’ll love the new feel to it. Did you remove the carbon filter?

 

Man, didn't you have issues with your WKOR sliders' PC as well? What do you guys use up there for clearing up roads? Paint stripper?

 

Stamford. No I left the carbon filter in.

 

Odered one after Labor day and just checked on it..... backordered til mid to late October

 

Ordered mine from Serra. No updates yet.

 

I always have to email for an update anytime I order from Toyota
They never just send any updates to me

 

Hahahaha a whole lot of it. Yeah my WKOR sliders PC is actually thicker than the RCI. The photo was after I used a wire disc on it and realized how thin the PC was.

 

Naa, nothing that benign.

.

 

Actually, they apply sodium chloride (NaCl), magnesium chloride (MgCl2) and/or calcium chloride (CaCl2). They also make and apply brine to pavement before a winter storm, in "optimal concentrations" of NaCl, MgCl2 and/or CaCl2 to "maximize their effectiveness" and minimize the overall amount of salt required. The stuff is incredibly caustic.
.

 

Those dreaded lines on 84/91/95…

 

Tell me about it ... I believe that brine was directly responsible for the demise of my beloved Excursion.
.

 

Had The Truck shop prep, paint and mount C4 bumper with BD S2 pro reverse lights. thanks to Colton and Hotshot for the lights and harness.

 

My wife drove my TRD today. It made it home and there is no damage. All clear.

 

So trying to figure out a nice solution for the

$59 Hayden 679 Universal 11” Rapid-Cool Add-On Transmission Cooler to Enhance Cooling (not for direct replacement of the factory unit)

Hayden 679. Currently drawing something out on the cardboard, and it seems that I may be able to use the center support factory holes and a hole that is about 8-10in from the center support. Only thing is that I might be able to only mount it on one side, 4 bolts next to the center support column.

Wondering if that’ll be enough to hold it down or would I need to think of something for the left side of the cooler too.

 

Very nice looking truck!

 

Thank you..

 

Got it .. didn't realize that piece of trim came off.

 

Received today

Revesol

100% great quality feel

 

How much lift do you have? Would you mind measuring front fender height? I'm in need of new tires and was looking at that size

 

from what i know so far no lift. no spacers that I see to lift it. bought truck used with the wheel/tire setup on it. i just added 1 inch spacers to match flares

 

Did you relocate the rear facing camera? I’ve been thinking about moving my spare out back but with the extra 1-1.5’ in length I’d want that camera. Truck looks great btw.

 

That's why I prefer to prime and use bedliner. Easier touch up too.

 

Steelit

 

Thanks

Not yet. I do have an OEM camera ordered after nearly a year. Will be mounting on the bed rack when I receive the camera.

 

Bought the TRD exhaust for my truck, should be installed tomorrow. Cannot wait to finally be able to hear the V8, its so bloody quiet

 

This! I recently ordered rock sliders and a tire swing out for my wifes 4runner without the powdercoat. I'm going to prep it myself and use self-etching primer with either bedliner or steelit this time.

 

got a three inch wescott lift on there. new bilstein 5100s, 295/65/20 trail grapps. 1.25'' spydertrax spacers. muffler delete. a couple of interior mods (CarPlay screen)