1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

EFI FUSE POPPING

Discussion in 'Sequoia 1st Gen (2001-2007)' started by Mbd5033, Sep 4, 2024.

  1. Sep 4, 2024 at 12:03 PM
    #1
    Mbd5033

    #1
    Mbd5033 [OP] New Member

    Joined:
    Sep 4, 2024
    Member:
    #122376
    Messages:
    1
    Gender:
    Male
    First Name:
    Michael Daye
    Vehicle:
    2006 Toyota Sequoia
    None
    My 06 Sequoia SR5 I Force V-8 blows the 20 AMP EFI fuse when I crank it, but if I remove the FUEL PUMP relay, it cranks and has a continuous crank. I want to get to the fuel pump as I have no fuel pressure either when I turn the key ignition before cranking but cannot find the access cap under the rear seat on the driver's side to access the fuel pump. I have the carpet pulled up and seat removed, and nothing. Does anyone know if that year has an access door for the fuel pump, or do I need to drop the tank? Anything would help- Thanks
     
    Mbd5033, Sep 4, 2024
    #1
Register FREE to Reply!
To Top