1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Power window issue: front passenger+rear driver move simultaneously from switch

Discussion in '2nd Gen Tundras (2007-2013)' started by 1badTundraJr, Aug 31, 2024.

  1. Aug 31, 2024 at 2:17 PM
    #1
    1badTundraJr

    1badTundraJr [OP] New Member

    Joined:
    Jul 30, 2024
    Member:
    #120632
    Messages:
    2
    Gender:
    Male
    Yorba Linda
    Vehicle:
    2011 Tundra TRD Rock Warrior
    35"x12.5" K02s on Kensai 17x8.5 +0
    I'm experiencing a really odd issue where my front passenger and rear drivers side windows started glitching where they would each work Intermittently. At first I thought it was the motors going bad so I took the doors apart and checked each of them independently and they seemed to just need some grease on the tracks. I was then able to further verify they work due to them working fine from their respective switches. The problem I am experiencing now is that when I use the master drovers side button for either window, they both roll up/down simultaneously although incredibly slowly. I then opted to replace the switch thinking it was bad but that did not solve the issue. Finally I assumed it might be a wire that might be cut and touching another so I inspected the wires near where they plug into the switches bud did not see anything unusual.
    Any ideas on what to try next?
     
  2. Aug 31, 2024 at 2:36 PM
    #2
    Retired...finally

    Retired...finally Utilizing that doctorate of procrastinatory arts

    Joined:
    Aug 6, 2021
    Member:
    #66426
    Messages:
    3,287
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2021 Barcelona Red SR5 Crewmax
    Custom bug spat pattern hood, grill & bumper. Dead Live Oak leaf collection under hood, cowl and lower fenders. Beach sand custom floor covering.
    Try working the switch while opening and closing the drivers door. My thinking is the wires are touching where they bend when the door swings. You might see something different happening.
     
  3. Sep 2, 2024 at 12:09 PM
    #3
    1badTundraJr

    1badTundraJr [OP] New Member

    Joined:
    Jul 30, 2024
    Member:
    #120632
    Messages:
    2
    Gender:
    Male
    Yorba Linda
    Vehicle:
    2011 Tundra TRD Rock Warrior
    35"x12.5" K02s on Kensai 17x8.5 +0
    Tried with all 4 doors open and using the switch from the passenger side and it still causes the problem. Both front passenger and rear drivers rolled up/down together
     

Products Discussed in

To Top