RESOLVED: coolant leak after timing belt replacement

Glad you got it! One bolt or washer always seems to get away.

 

Glad you got it. The crank position sensor wire is attached to a clip on the driver side cam cover. My clip was broken so I zip tied it to the clip. I tried to look up the PN and get a new clip but 82711-43020 doesn’t look anything like the clip that’s on my truck. I was thinking a clip that has a snap around the wire would be better. Let us know what you do.

 

I can take a pic of how I did it - fair warning I’m 90% sure it’s wrong but I haven’t had a problem yet.

 

I’m pretty sure the wires are supposed to go on the backside of that AC line.

 

Thanks. Behind the fan bracket

 

Added to megathread.

 

Thank you and good call Shifty - that should definitely help others in the future

I'm sure that information is out there, but I spent a long while searching without luck

 

We haven't had one that looked as good as @BroHon's sample there, and that's what I'd been waiting for.

 

First contribution!

 

It took a little finagling but both connector ends can fit down through there. A pair of needle nose pliers will be helpful. At least with my big meat fists it made it easier.
Here is what you are avoiding by having them routed properly.

 

I need to actually look at mine now that there's a great example picture to look at. I keep forgetting to. The dealer did my timing belt last so I'd like to think it's good.