WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Because race truck

 

Added this red start button cover today. I like the color just not too sure how I feel about the lettering.

 

Husky x-act contour liners installed. I have the hard plastic-y ones on my 4Runner and they aren’t nearly as good of a fit. These are great and worth spending more on imo. They cover more and have little to no gaps.

 

Installed 1794 LE "Toyota " center cap with TRD wheel on my Platinum

 

Swapped 1” rear spacers for 1.5” for a little more rake.

 

Changed the Oil at 2300 miles. Added a Fumoto FN133N value. Also, add a Miller Cat Shield.

 

bruh, wut….

lol this is the cabin filter. Not the intake filter lol.

I have the TRD air intake filters though. And yes, those do make some extra spooly noise but likely hurt MPG for me.

 

Almost 6000 miles and finally got the tint done.
These might be the first full pictures I've posted of the truck too.



Llumar IRX Ceramic
Windshield: 50
Front Doors: 25
Rear Doors: 40
Rear Slider: 30
Pano Roof: 40

Only had it for two days but what a transformation. I should have had a thermometer in the cab and done a before and after, but the difference is huge.

 

Do you have a part number for these center caps?

 

Tested out my ceramic tint to make sure it was legit. Placed a UV lamp 16” away from window, and tested with window down and then up.

Down - 342F
Up - 107F

 

What’s that kinda tint run? $$

 

Not 100% sure.
Everything painted on the front of the truck by the grill, front fenders/flares, hood, headlights, rocker panels, rear fender flares, and lower rear bedsides all wrapped in Legendary Prime Plus PPF which is self healing and comes with a 12 year warranty. The entire truck was coated with BC 7, a 5+ year ceramic coating. The front and rear side windows, and rear window all had ceramic tint installed. Total price was $2k, would do it again in a heartbeat, Toyota paint is soft.

 

Still debating on having the ceramic put on the sunroof, but hear there are risks. I would also do the front windshield but am worried about it being to dark at night, even at 70% tint. My sides and back are pretty dark.

 

It makes a dramatic difference in the Texas heat/sun. I have XPEL PPF on the full hood and bumper, 70% XPEL PRIME XR Plus - Nano Ceramic on windshield, 70% XPEL PRIME XR - rear windows and Sunroof, and 30% on front side windows for $2,000.

 

I'm feeling pretty good about my w/s at 50%; doesn't seem bad at night.
The owner of the shop that did my tint had 40% on his truck's w/s, and way darker (forgot the %, it was low) everywhere else. I sat in that and it seemed dark IN THE DAYTIME.
I'd bet you'd be fine at 70%.

 

Is this all ppf or part of and part tint?

 

Had? U dont have the truck anymore?

 

$850 +tax on mine. Full ceramic.
Probably $100 less if you don't have/do the Pano roof.

 

Where did you get those wheel caps?

 

Lumar pinnacle ceramic
$350 for front (15%) rear (50%) and back window (50%). Almost perfect match.
$200 for windshield (50%)

absolutely do the windshield. I was going to get Air80 on the front which is 100% clear but has a blue tint. The tint shop strongly recommended I do 50%. And at the last second I had them stop right before they cut the Air80 tint and put 50% on so glad I did.

 

That’s a great deal! Reputable shop quoted me $1000 for ceramic coating. I did tint for $550 total. PPF on just the front area (big zone) was over $2000.

 

The local shop here is great, always something interesting being worked on there. Owner also has a huge following on YT (249k subs) so alot of informative detailing stuff there.

 

Watched my stereo knob fall off. How much of a piece of shit must that knob be…7,279 miles and barely touched. Wonder if they will warranty it.

 

PT998-35221-3S

 

Tint shop I went to here in Charleston charged me $600-700ish for 5 windows (4 sides and rear) and a strip on the front windshield. They would not tint the pano sunroof as they said they've seen them crack/ break because of the tint.

 

Huh. Must be a regional/climate thing where we just don't get the same level of sun/heat/angle of the sun up here? The place that did mine has been in business for 20 years and no issues tinting sunroofs.

 

And just like that, u cast doubt back into me getting the moonroof tinted, lol.

 

This may have been mentioned already, but do you have info on how you installed this? I have the factory bluish footwell lights in the front on my SR5 but nothing in the rear and would definitely like to do this.

 

Did you have a factory wireless charger that came with yours or is that just a complete add on? My SR5 did not come with the qi from factory but I want to add something in that location it normally is.

 

I like the center caps. Wonder if anyone has put them on the TRD Pro BBS wheels. Assuming they would fit the same...