2016 Tundra SR5 - DRL Conversion (Again)

I have reviewed the existing threads on upgrading my 2016 SR5 to LED DRL by swapping out SR5 lights with OEM 2016 1794 headlights. I am attaching front and back pics.

I purchased the harness pictured before finding this site, so I am not entirely sure if they are the correct ones. It came with 3 harnesses, one for both DRL LED lights equipped with the 10amp fuse and the other two for each headlight LED conversion.

The headlight swap was easy, but since all I wanted was the lower LED lightbar I only used the 10amp harness which unfortunately did not work and reviewing the threads has my head spinning.

After the swap all lights are working correctly except for the LED DRL lightbar at the base. I am unsure if it is because Im missing the “Amber Delete Mod” fix or they aren’t working because I elected to not use the other two harnesses (my way of thinking is I shouldn’t need them because they get wired directly to the 10amp ignition fuse).

Do I need to fully convert to LED using the other two harnesses also? I tested the 10amp harness directly to battery but they still will not light, should they?

What step am I missing? If someone can guide me in the right direction it would be greatly appreciated and thanks in advance.