WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Added oem door lights!

Followed “wolfpack media” method on you tube

 

So you just pull the panel unplug switch plug in oem harness into one side and button into other and done?

 

Yes. It takes roughly a minute from start to finish.

 

Recently added the Tufskinz letters to the front that were gifted to me. I really like the Tundra letters in black with the red trim.

 

Those plus red recovery points...

 

Nice sliders!

I'm starting my DIY slider build this weekend.

I'm going with 1.75 .120 DOM for the slider and 2x2 square tube for the main body. I'm still undecided on the frame mounts though. Did you mount with through bolts, nutserts, something else? Do you have any pictures of the brackets mounted to the frame?

Thank you!

 

Got my truck back yesterday!

Way quicker than I was anticipating based on what I was initially told.

I had pinged Toyota Corporate just to see if they could provide any insight into a more accurate timeline or if there was anything that could be done to expedite and they had said late last week they were going to look into what they could do. So not sure if that helped or if it was just coincidental.

According to the my service person, they were told to expect the tank end of the month but apparently it showed up yesterday morning and they went ahead and replaced it.

So happy to have the truck back; and just two weeks before our first trailer camping trip of the year (and first time pulling the trailer since upgrading from the Tacoma) so I'm pretty pumped.

Now just need to get the fuel tank skid ordered. Won't ever be parking in the road again.

 

Nice job. You could prob sell those sliders. I like that they attached to the frame. I'm dealing with some Go Rhino's that I purchased from Real Truck and what a mess - brackets don't fit, miss-tapped nut plates....missing hardware....

 

Any links for the best wireless chargers to buy for 2024 Tundra? How and where did you hook them up in your truck?

 

Where did you find the tow hooks?

 

Hey Thanks! You and I must think alike. I used 2x2x3/16" square HSS for the main rail and 1.75x0.120w DOM for the outrigger. The frame plates mount with some through bolts, some riv-nuts, and some holes were pre-threaded for M10-1.5 screws. Here are a couple of pictures of the frame brackets during test fitting. Hopefully this helps.

Thank you as well! It would be fun to produce them and sell them. Your Go Rhinos sound like a frustrating experience. Are they rock sliders or steps?

 

Borla atak!!!!

 

Sound/video sample please, for the general masses.
...and, confirm or deny that you had to remove your bed step, if you have/had one, to install this system.

Thnx

 

Yes it did.

 

It'll be ready in 4 hours, one thing for sure they did not have to cut anything they thought the differentials would get in the way but it just fits right in there.

 

I replaced my stock wireless with ones of these. If you truck did not come stock with a wireless, they have an option for you also.
Home | European Enterprises Firm

 

Exactly what I was looking for!

Thank you!

Did you cut your frame mounts from C channel, or do you have access to a bender to get that radius bend?

 

Let me know if you ever decide to sell a batch. I'm in!

I never thought 12 bolts a side could produce so much problems. Brackets wouldn't fit in one side. One drop down bracket was misshaped.

 

I had the brackets laser cut and formed on a press brake.

 

I really appreciate that! I have thought about it - might have to think more about it. My design is for a CrewMax 6.5' bed. I don't have access to a 5.5' bed version Tundra, which it seems most people are buying, as far as I can tell.

 

https://youtube.com/shorts/RJboIEzINDE?si=bZk8a_NxUiYtCTCd

 

That explains why the fit like a glove! Very nice

 

Put tires on it

 

Love it. What tires are those? 20" TRD rims? Is that lifted or stock?

 

285/65R20 Ridge Grapplers. TRD wheels with 3" TRD lift.

 

Looks good, any rubbing. Thanks

 

Yep, rubs on the swaybar at full lock...just like everyone else it seems. So I'm ordering 1" wheel spacers, removing the mudflaps, and pinning back the felt liner.

 

Thanks for the info, getting same size tires saturday but Toyo's, don't have mudflaps. Don't really want spacers I'll see if i can live with out them.

 

I guess the mudflaps are a TRD Off-road package item? If I just remove the flaps and reinstall the screws, is this how the non-mudflap-having trucks are?....the felt liner just kind of floats out in space without a mudflap to sit behind? Or are they pinned back already? Maybe that's why there are already holes in the metal behind them?

 

he definitely could. Add a top plate and it looks as good as Rci. if it wasn’t for the look of the RCI’s I would have gone a different route too. I also agree with him that not a lot of sliders go all the way back.
Rci documentation is pretty hard to understand and when I asked about the discount that was running a few weeks later they told me it had been too long since I ordered them despite it not arriving.

if the op made some, I’m sure he’d take some of their business.