WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Man, that is cool. Can you drop a link for the magsafe charges and the wiring harness you used?

 

thanks! I like to over complicate things so the whole phone charger set up I did custom.

I used Apple MagSafe charger pucks, some flush mounts from Etsy. I hardwired from the cigarette lighter, using a jumper harness I made, to power an additional cigarette lighter I mounted into a small project box. From there, I used a mini dual usb-c adapter capable of 20/36 watts. The MagSafe pucks are painted flat black and I used come forged carbon vinyl to wrap the borders.

started off with this basically (see first photo) then did all the wiring on my own. I didn’t take any photos of the final wiring, even though I should have cause I made sure to wrap up everything in mesh sleeve and Tessa tape so it looks clean/OE, but the second picture shows what everything looks like from someone else who did something similar (second photo). They made their lives much simpler by wiring to the USB ports in the console but I keep my gun tucked in mine and didn’t want any wires to potentially cause an issue with retrieval.

I tucked the project box in where you see the green connector (second photo), behind and to the right of the shift knob. Made sure to tuck everything out of the way just to be safe.

 

I can fix just about anything around the house. But that picture right there makes we want to vomit. No way I would tackle something like that. Gladly pay my money to the car guys.

 

Can't people charge there phones at work or home.

 

I got rid of all my charges in the house and only charge in my truck. Sometimes I drive around JUST to charge it!

 

Oh that makes perfect sense....

 

Beautiful! Amazing job!

 

Well, you know he didn't drill out the tank hole for plugs.., for his ears anyway....... : D

 

Swapped my HVAC control unit so I wouldn’t have to drill through my original one to have a radio knob work after the 8 to 14in screen upgrade

 

Installed the 1-inch Cornfed leveling kit on my 23 Limited TRD OR. At the alignment shop now. Sitting just shy of level and looking good.

 

I also just installed the DD reverse lights, but I went with the SS1's no cut with the 7 pin jumper. I like the small square vs the bigger rectangle. Super slick and easy install.

I also installed the engine shut off on/off switch bypass module. Never have to press that stupid button again.

 

Need some help on the bed step install. First, there are two part numbers and apparently one made in China, one USA. I got the UsA one here’s the photos. PT392-34231. Instead of

$154 PTS3034000 PTS30-34000 Folding Truck Bedstep Compatible with Toyota Tundra(2022-2024), Retractable Rear Bumper Step, Easy-to-Install, Non-Slip, Corrosion-Resistant

PTS3034000. The difference lies in the step and Allen wrench mechanism. There’s no square washers to insert into the step itself, and mostly, the three screws are NOT allen, they are some kind of star, without any tool in the box?? Any idea what tool should I use?

 

Those look like torx heads. More common in the European cars like the VW's that I had n the past.

They should be available at any tools store next to the allen head tools.

 

Yes just realized they are T25 torx. Thank you!!

 

Bought 285/65r20 TOYO OPEN COUNTRY A/T III installed next Saturday at 4 Wheel Autoparts. Screw you discount tire.

 

Finally uploading pics of my truck still new here !! Was waiting to delete some chrome before I posted lol
So far:
Got tints
4x4 overlay
Tundra letters
Chrome mirror cap replaced with color match
Got lazy on the door handles for now and just went with stick on black from Amazon
Color matched mustache and the little front pc which says tundra (painted the trd pro one to mgm hell yeah )
Rear bumper pcs replaced chrome with trd pro
Front fender flares replaced with trd pro
Rear out of stock so waiting on those ..:

 

Finally put some shoes on. Not sure about the poke.

 

You might be running over small dogs and kids on the sidewalk with that poke!

You might want to consider an extended flare to keep the sides of the truck cleaner. It looks nice and aggressive otherwise!

 

What’s the offset? It might grow on you !
Also lift ? I like the bronze wheels , kinda similar to what I’m thinking of getting

edit : I also noticed the window trim , did you change that or use something to black it out ?

 

No lift. +10 offset on 17s. Was looking for 18s with 0, but a great deal on volks with ko2s couldn't pass up.

Slowly working on blacking out the chrome. A buddy did the tint and will wrap some of the chrome for me when he gets time. The chrome around the windows didn't flow right to me. Black looks much better.

 

First post for a first time, new Tundra owner. Today’s list includes: rear Cornfed 1/2” spacers (to compensate for the permanent payload in bed), two Diamondback anchor plates for securing the rear of the cover in the folded position, and washed it. Prior “todays” have included: Diamondback SE Cover, some TUFSKINZ exterior lettering, NSV dual console charger, VIOFO dash cam with Dongar power adapter, Matte black cover for gloss black center console trim, AJT center console tray liners, Spigen matte screen protector, and Center console tray insert. Coming soon: Redarc 400W inverter mounted in center console with rear Toyota OEM receptacle.

 

The domed lettering are really nice, I bought them from a Etsy seller based in PR, but fell right off, although it appears high quality. How is yours sticking to the plastic?

 

So far, so good! I purchased them from TUFSKINZ through their Etsy store. I washed the area really well with a Dawn dish soap solution and then let the area completely dry. Install temp was 75 F with lows in the upper 50’s or 60’s. Also, I maintained pressure on each letter for approximately 60 seconds at the time of install. They have only been on a few days though. So, only time will tell if the adhesive lasts.

 

MGM rocks !

 

Where did you get this engine shut of on/off switch bypass module?

 

Jeff Bezos

 

Thanks. I found it.

$24 Auto Idle Stop Start Eliminator/Disabler/Disable/Delete/Canceller, Compatible with Toyota Tundra 2022-2025 and GR Corolla IMT 2023-2024

https://www.amazon.com/Eliminator-C...prefix=toyota+autostop+disable,aps,86&sr=8-10

 

Installed the C4 Overland rear bumper and Rigid lights.



Please excuse the bird shit.

 

Tackled multiple projects this weekend on the Tundy. First swapped out the uppers. Next changed out the crappy stock fogs for some DD fogs. Night and day difference and also added the hitch pod reverse light for extra light in the rear backing up at night. It was much needed as well.

 

I recently built some rock sliders for my '24 SR5 TRD OR 6.5' CM. I made sure that they went as close to each wheel well as possible, as I've noticed many rock sliders on the market stop too far from the wheel well, leaving some of the rocker panel vulnerable to damage.

Before I add the pictures here are some other modifications that I have done so far. My #1 priority is body protection and then I will focus on suspension and bigger tires, etc.
-Lil B's Fab front bumper
-Talon's Garage skid plates
-Timbren Active Off-Road Bump Stops (I am currently waiting on parts to arrive to make a custom design that allows me to switch between the off-road bump stops and the SES bumpers/springs for when I tow (I have an 8k lbs car hauler to pull).
-Rear axle breather relocation