Cooper tire set up?

Is anyone running cooper discoverer ST Maxx 295/70R18 on an 18 x 9 wheel with +18 offset? And if so, how much lift do you have in front.

Alternatively, is anyone running a 34.25 X 12 tire with 2.5 inches of lift in front with no rubbing?
Thanks guys.

 

Should be easy enough. A few things to plan on:

Remove small front mudflaps.
Cut the lump off the big rear mudflaps, or remove them.
Heat and form the front of the fender liner if needed.

If you’re close to your body mounts, add a little more caster angle to your alignment; which sides the tires forward a little.

 

was going to remove front shorty mudflap, and was going to shim out the whole front bumper by .5 inch. Was concerned about the back.
Appreciate it.
What's your set up?

 

Look around here, and that search in upper right is very helpful. Try searching that tire size. There are tons of pics of setups with 295/70s here with details. And get 2.5 gen Pro forum here has a large number of 295 pics

Running 2-2.5 lift, +18 offset and 295/70-18 you will be removing the small front spats in front of tires and the mud flaps and spacing that bumper will likely be needed as well.

 

285/75-18 on 18x9 +25mm SCS.

front flap gone. Rear flap cut up a bit. Bumper shimmed 1/2”. 3” lift.