What have you done to your 2.5 gen Tundra today?

For sure. I can deal with a few miserable days of moving to live somewhere so much nicer for me and the family.

Thank you!

 

This was a weekend project that spilled over to last night. QC on the Napa supplied seals is not up to par.

The noise:


The issue....20 thou difference between Napa and OEM.


And a vid of how easy it was to remove...

 

Picked up my truck from the shop for the first repair I did not complete myself, the steering rack replacement.
Labor was $900 which IMO, well worth it. Total with OEM parts that I sourced, $1400 replacement. I’m not stoked on it but the bushings were really bad. I found a great deal on an oem rack for $380 so I just went with that. All new shocks, leaf springs, UCAs, tie rod ends and steering rack has me feeling brand new!

 

Let me borrow that trailer.

 

Thats far cheaper than when I had my steering rack replaced about a year ago. On mine, the TRs were seized and they couldnt adjust them for an alignment. Glad the truck is up to snuff now.

 

Why not just replace the bushing?

 

I just, after 9 days, received an email from RCI. They acknowledged the issues I experienced, apologized, and offered a partial refund against what I paid. My opinion of them is most positively increased.

 

5k cap

 

Truck has 115k with hard off roading, tie rods were original and toast. Made more sense IMO to have the security of a new rack and inner/outer rods going into my next 100k. Also, I didn’t feel like tackling the stress of swapping the bushings myself.

 

Knocked out one rear side for the Alcon bbk kit. Will do the other tomorrow then bed them all in. Ready to run Saturday with a raptor r and some TRX’s.

 

Ordered up an OEM power tailgate lock kit.

$234 PK3B6-34JS0 Genuine Toyota 2019 & Up Tundra Power Tailgate Lock Kit Standard Wheelbase PK3B6-34JS0

PK3B6-34JS0. I will likely be getting a retrax pro xr tonneau cover sooner than later so I thought it’s pretty much a must have.

 

I got the $67 one and it works fine so far.

 

I have the same setup and that lock kit is the best money I've spent.

 

What options did you get on your cap?

 

How’s the fender flares holding up on the truck? I bought the same style, looks perfect for the truck, but the rears did not sit well and were warp. It didn’t mount on correctly. The front was perfect, fits great, but ended up taking them off. Where did you purchase your set from and what brand is that? Might consider giving it another try. Thanks.

 

Mine have been good! Been on since 2021 I think. These were from a seller on ebay that no longer has them in stock (theres a thread on here somewhere where we tried to find them recently). If I remember, I had to tighten the bolts in different ways to try and get one of my rear ones to sit nice and flush against the truck. Sometimes tighenting one bolt too much would prevent it from pressing up tight but you could try another bolt to "pull" it in. I also swapped the rubber seals that came with them to a wider one that is more like the bushwackers come with so that may have helped hide any imperfections in the fit

 

Finished some installs today, rims, head lights and tail lights. Pretty happy with the results.

 

Welcome northern neighbor.

 

I havent seen those headlights before what are they? Looks like the outsides are projectors and insides reflectors? fill us in?

Not sure they would go with my car though as I have 0 chrome on the front end

 

They are Roxx led projectors. Waiting to see how bright they are at night. Seemed bright enough during the day.

 

Props for using some different parts than everyone else.... It's nice to other variations of wheels and lights on our trucks!!!

 

So after driving to work early this morning, I can say I don't believe the Roxx headlights are any brighter than the stock ones. They have a better range sure, but not any brighter. I'll probably upgrade the bulbs at some point. Still happy with them though. The reverse light on the PZ tail lights is much brighter than stock. Of course being LEd helps a lot.

 

What wheels are those? They sorta look like Welds.

 

https://www.tundras.com/threads/what-should-i-do-with-my-stock-tundra.139385/#post-3520843

 

RockTrix RT105 in bronze matte finish

 

Color matched the mirror caps.

 

Sweet. They look like the ones I got

$21 Front Grille LED Lights for Toyota Tundra 2008up Universal Trucks SUV with Raptor Style Grill Trim White DRL Lamps for Dodge Ram/Ford F150/ Jeep Gladiator/GMC Sierra/Chevrolet Silverado/ (5PCS)

here

 

Flipped the mounting bracket on the roof light bar (lowered it in line with the wind fairing better).


Installed the TRD CAI kit


Fiddled with the wiring on the light bar and think I found my problem (installer error).

 

looking good…

 

Sting Ray