WHAT HAVE YOU DONE TO YOUR 3RD GEN TUNDRA TODAY?

Could the words be: "I am getting great mileage on the deck of this truck"?

I hope this isn't another bearing failure!

 

How do you link them?

 

It stopped the adjust seat message, so yay!

https://youtu.be/502pju7_g8w?feature=shared

 

Picked her up this morning…added Wescott 3/1, RC Power Stepsand Nitto Recon Grappler 275/65/20’s

 

New tint!

 

Added insert

 

Can you post the link?

 

Tufskins

 

I also have one of these and it’s honestly great. Makes that little pocket more usable as things always fell off when opening the console.

I do find though when my elbow goes on it it will open up.

 

From Buena Park, CA. they make good covers !

 

Hahah.

believe I had the hybrid inverter fail. 12.5k km /7800miles. At the dealer now.

 

very minimal correction will be needed. I did a real quick polish with a soft pad and rotary.

if you’ve ever waxed a car you can instal your own ceramic coating. 300 bucks for the coating. 20 bucks for polish. 20 bucks for the pad. Rotary from harbour frieght. Make sure to decontaminate with iron remover, and a synthetic clay towel.

took me 8 hours

 

Mine came with PPF for the entire front. So no paint corrections for me.

 

How does it stay in place? Is it sticky one the bottom side?

 

https://www.tufskinz.com/collection...ucts/tun069-center-console-foam-toyota-tundra

 

Thanks I didn’t know how to add a link.

 

How did you link your key fob, having same “do you want to adjust your seat”

 

Nm I’m an idiot, saw the video

 

UPDATE: in August I pulled off the chrome bumper corners, hand sanded them, and then spray painted Dulpicolor MGM ($14 from auto parts store). Seven months later and a WI winter and they still look great.

 

I have one of these and it was not as good as I was hoping. Maybe 3 out of 5 stars rating.
The problem is with the way it latch. I don't know the name of the type, but it is where you push it down to release, and then push down to lock again. So when you press your arm on the lid, the latch will disengage and the lid pops up a bit so that you can open it.
It still works. I keep napkins in there so it is always accessible (I am always eating something). It's just a little annoying sometimes when it pops up unintentionally.

 

How did it go? Did you just heat and peel off or you had to use other product? Looking to remove mine but saw here that some guys had surprises doing it and had clear coat issue after removing the decals?

 

My son tinted my windows and I did a 2 stage paint correction on everything but the 4 doors and roof. I then did the first of 2 ceramic coats. I’ll do the second coat on everything and paint correct the doors/ roof and do its first coat on Tuesday and Wednesday.

if the sun was shining it would be more impressive!

 

somebody drilled a fucking hole in my gas tank

 

Damn! Guess they had plenty of time to sit around while it drained..that's a small hole. Sorry about your luck man.

 

Can you link the lights?

 

A few sun pics

 

Toke the kid for a ride

 

All OEM parts:
Driver Front: Trim Light: 810800C200 Tray Light: 810800C040
Passenger Front: Trim Light: 810800C030 Tray Light: 810800C040
Driver Rear: Trim Light: 810800C220 Tray Light: 810800C050
Passenger Rear: Trim Light: 810800C210 Tray Light: 810800C050

https://www.youtube.com/watch?v=NxxADet56HE

Video here is a good start, then can look at this thread for other details
https://www.tundras.com/threads/12v-wires-for-door-panel.115649/

 

Was cleaning the truck and popped the hood to take a closer look at the engine bay to late now to clean it after I did the outside but found this on my headlights anybody else have this too ?

 

Yes, it's on every truck.