Top Seal coming out

I have a 2021 Tundra and the top seal where I think you would put roof accessories pops out almost all the way when I go into a car wash. I just pop it back in to the best of my ability and it happens again when I go into a car wash. Anyone else or any ideas on how to fix it?

 

A little marine epoxy should work.

 

Just noticed my 2015 is doing the same. There was a tsb on it but unfortunately mine is out of warranty.

 

Is it popping off at the front or back?

 

My 21 does this as well.....But about 5 months ago I used some black electrical tape as a "Temporary" Fix, surprisingly it has held up with no more issues. I have purchased some 3m double sided tape for a more permanent fix but haven't gotten around to it.

 

Where is that TSB please?

 

https://static.nhtsa.gov/odi/tsbs/2015/MC-10111326-9999.pdf

 

Thanks much. That's a Gen 2 right?

 

Pretty sure it’s expanded to more than 13-15. Part numbers are probably superseded.

 

The reason I ask is because the TSB say 2013-2015 and this guys truck is a 2021. I have a 2021 still under warranty, so if I have this issue, according to this bulletin, I am not covered.

 

The technical answer would be that y’all both have the revised part. It also states in the TSB that it’s only covered under the 3/36.