Added 37s. Truck only runs at full lock on the sway bar

So I just installed 37s on 17” Methods with +25mm offset. Currently only runs at full lock on the sway bar. So what are my options to eliminate?!
Thinking either remove the sway bar or swap for 1/4” wheel spacers.

For those running 37s without rubbing… what’s your offset?

 

No answer for your question....but would love a picture of it!

 

I’ve got the same setup. I also rubbed my sway bar. I pulled the bar off and it drives fantastic.

 

1/4” spacer is out of the question as of right now.

 

Really digging the wrap that's definitely something I do to my tundra!

 

Thanks!

 

Those look great. Well Done!!

 

How’s it drive at 90mph (on the speedo) on windy roads? Asking for a friend.

 

Come on now, you can afford 37s and a 3" lift, I KNOW you can afford to get 8mpg.....

I'm going to test this for sure. The 37s alone, especially on 17s, make for much more roll in corners than the 35's w/ 0 offset. It'd do me a service to have to slow down.

 

I run 37” with Kings 3.0 at 1.5” of lift
Methods +35 offset. No rubbing at all.

 

I’m thinking that 1.5” of lift has something to do with it.

 

17x8.5 or 17x9?

 

Share some pics of this setup! Thanks

 

Tack weld something to the steering stop on the LCA?

 

Sorry for late reply . Here some pics