fuse taps 23 tundra

as any one used fuse taps??? i went to install my dash cam from my old car that i originaly spliced into the cars wiring harness. i spliced fuse taps on it this time but they wiggled in the sockets
should i worry about the wiggling and will the fuse taps widen the prongs so that regular fuses wont fit in again if i remove it. is there any fuse empty fuse spots that i can use or maybe a harness that i can put behind the 12 outlet?

i will be putting an amp in this spring so i can tap that 12v source or run a dedicated wire next to it for the constant on wire but the accessory on/off wire would still need to be hooked up

not sure if it would be a good idea to tap t harness im putting in for the accessory wire to turn on amp as i might be using a dsp in the middle not sure how many free amps will be on the constant on and accessory wires from the radio.

its a rexing hard wire kit


thanks

 

Do you have any info on when power would be supplied if I where to use this? Like, does this only power on when ignition is on? Or does it power on when the doors unlock before starting the truck?

 

Ordered that and works perfectly