I'm an asshole

I cut my factory stereo wiring plug right off the harness. I'm thinking Flux solder and liquid electrical tape

 

Butt connectors!

 

Straight to the point. I like it. Welcome!

 

Hardwire the radio, then spray paint all the wires the same color.

 

Re-pin the connectors prior to spray painting the wires the same color.

 

Hey, mine are probably cut too but I wasn't the one who replaced it so I try not to feel as bad about it...

 

A
S S
H O
L E
...everybody!
Dennis Leary sang it best.

 

Maybe, but this one’s pretty good too.

https://m.youtube.com/watch?v=sybrZXnWx60&pp=ygUYV2VyZSB5b3UgYm9ybiBhbiBhc3Nob2xl

 

If you're an asshole you're certainly in the right group..
Welcome to the forum.

Easy way, butt connectors if you have enough slack.
If you solder I'd use heat shrink tubing over it.

Wiring diagrams are found here if you need them...

Ultimate TUNDRA Wiring Diagrams Collection | Toyota Tundra Forum (tundras.com)

 

LMAO. Classic Carrey.

 

Welcome to Assholes Anonymous. We get a lot of new members in January, but very few stay...

 

Welcome to the family!

 

I won't argue. Welcome.

 

I solder and heat shrink connections, then friction wrap the section.

At the age of these trucks, I'm sure many have lost the factory connectors. I never plan to reinstall my factory radio, but I used the adapter harness to make the install easier.

 

I've had my OEM HU, amp, and speakers in my attic for 8 years.
I thought I would probably put it back in the truck if I ever sold or traded it.
But as years go by, I'd probably just leave it in there..

 

I would use crimp connectors of the correct size for the wire gauge, reason being is when you solder it wicks up the wire and when solidified it will create a stress point that can break with vibration at that spot.

 

If you heat the wire that much, the insulation will melt and you'll have bigger issues. I've never had to fix a solder connection, but have seen crimp connector break or damage the wire.

Some people do not mechanically connect the wires correctly and rely on solder, which does create a stress point. Solder is an electrical connection in wiring not meant to physically join them.

Ok with any of it as long as they fix their own wiring.

 

Who isn't?

 

Not me.
I'm extremely cordial, amicable and generally charming.

 

Do you drive real slow in the ultra-fast lane?
While people around you are going insane?

(10 points to the guy who gets this reference.)

 

Wait a second… Mods - I think this account has been hacked. Please look in to it.

 

In children’s book voice: “Said the A-hole.”

 

You’re a baseball glove - get on the truck.

 

But those that do stay, gain weight and lose money!

 

While handicap people, make handicap faces?