GEN 3 (2022+) Wheels and Tires Photo thread

Looking pretty sharp, lots of chrome up front, I wonder if the Capstone grill might of toned it down a little. Either way, embrace the chrome!

 

I have mixed emotions all of it. I swapped the grill out the very next day I bought it. It’s a limited, and I just hated the grill it came with. I do love chrome, but I’m thinking about paint matching the mustache with the ice cap white along with the fender wells, and then blacking out everything else that is currently chrome. Hell, I have chrome, black, and alloy all on one truck. I’m a designer’s worst nightmare right now!

 

put on some 35s today no lift(planning to soon)
some rubbing on full lock
Tires yokohama geolander atxd 35-12.5-17
Wheels Kmc Technic

 

Finally took the hideous Black and milled Hostiles off, that came on the truck, and got some better looking Fuel’s on. Looks night and day difference, to me! What y’all think?

Before:


After:

 

Looks a lot better. I have fuel rebels in black on my 22 Tacoma

 

Factory everything except 35" Nitto Ridge Grappler
Swapped out my 2018 Raptor for 2024 TRD Pro. Miss some Raptor features but loving the Tunrda (first timer).
FYI slight rub on the plastic mud flap insert at full tilt. Nothing major.

 

just curious what specifically are you missing about the ole raptor?

 

Hello, sorry I’ve been searching and searching. I have the 2024 Tundra Limited with the OEM 3” lift 20” trd wheels and I want to know the biggest tire I can get without rubbing. I’m assuming after reading everyone’s posts it’s 285/65/20 but I want to confirm because the posts are all over the place. Thank you in advanced and sorry if this has been asked 1000 times.

 

People running 295/65/20 on stock everything tundra.

 

I have the 3” lift though. So I should be able to run 295/70/20 right? Haha see that’s why I’m so confused.

 

I don’t think you can get a 70 series tire in a 295 20. Factory wheels, with their backspacing limit the width. So a 35x12.5 may rub the UCA without wheel spacers. Someone will chime in.

 

Northern Toyota is correct. 295/65/20 is what you want. Or 35/11.5/20 but I think the 295/65 is a little wider and taller. If you get an aftermarket wheel with less offset, you can go up to 35/12.5

 

Not much difference in measurements from the 295/65/20 and 35/11.5/20. I have decided to go with a 295/65/20 on my stock 2024 Tundra 1794 4x4 suspension. This is what I will start with and then I am thinking about adding the RC 1.75" level to reduce the rake, we will see what the rake looks like after the tires are added. I have decided to go with the new Michelin LTX Defender Platinum tire, really liking the look of it, and of course the Michelin name/quality/performance.

 

Thank you for all the replies and help. I decided to go with 295/65/20 ! Will post pictures when it’s done!!

 

Yes, please do, thank you

 

Hi, love the look of the tires and the stance, what front level kit did you use? Thanks!

 

Hi, love the look of the tires and the stance, what front level kit did you use? Thanks!

 

Here you go!
295/65/20

 

Looks great! Any rubbing issues on the sway bar with the stock wheels?

 

My setup:

Wheels: Vossen HFX-1 Wheels 22x10 (Deep Concave) -18 offset
Tires: Nitto Recon Grappler 285/50/22
Suspension: Westcott 3"/1" Lift
Flares: Rough Country

Pulled back the front fender liners, zero rub at full lock.

 

Hi, love the tires, the look and the stance, what lift kit did you use, thanks in advance!

 

Sweet looking truck!

 

Thanks! Cornfed 1” front

 

Just trim the mud flap where it bumps out.

 

@Jnickle25 I'm thinking about ordering this size for my Sport. Did you notice much of an effect on MPG and speedometer reading?

 

Curious to see if anyone is running the Michelin Defender LTX Platinums?

 

Just got a set of 275/65R20 Nitto Recon Grapplers installed

 

I was able to pin the mud flaps back in the front with a zip tie. I made a small hole in the flap and felt liner, and ran the zip tie thru a hole in the frame behind, it moved the flap back enough that the rubbing ceased, and no trimming. I'll take a picture next time I remember

 

Any rubbing at all?
Also, looks like no mudflaps. Or did you remove them because of a rub?
This is the size I’m considering I but have the WeatherTech mudflaps.

 

not yet, but they are coming soon hopefully, looks like a great tire.