1. Welcome to Tundras.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tundra discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other Tundra owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Code po22 and po12. Another solution.

Discussion in 'General Tundra Discussion' started by mcgenius, Dec 29, 2023.

  1. Dec 29, 2023 at 6:26 AM
    #1
    mcgenius

    mcgenius [OP] New Member

    Joined:
    Dec 29, 2023
    Member:
    #109254
    Messages:
    1
    Gender:
    Male
    After going through the possibilities of the problem that are listed here in the forum and spending hundreds of dollars on sensors etc. The problem turned out to be the oil filter. Sometime in the trucks past the perforated metal sleeve that is supposed to be in the center of the filter was missing. This caused the filter to either not go in straight and get crunched or it can potentially get sucked out of shape by the oil pump causing cavitation in your oil flow which triggers the codes. Replacing the sleeve and filter solved the problem.upload_2023-12-29_8-23-24.png
     

Products Discussed in

To Top