Going to test drive, what to look out for

bobcatou · Nov 29, 2023

I will finally test drive a 2024 Tundra next month—hopefully a Platinum.

Besides the standard stuff, what things should I look for that could still be bugs.

I'm thinking:
1. Rear window molding not complete
2. Passenger window rattle.
3 Rattle of center console (I think that might have been fixed)
4. Any air noises.
5 Molding alignments.

I know there is a good chance these have been address, I just want to make sure.

Anything else?

Kap1 · Nov 29, 2023

bobcatou[OP] initial post: ↑

I will finally test drive a 2024 Tundra next month—hopefully a Platinum.

Besides the standard stuff, what things should I look for that could still be bugs.

I'm thinking:
1. Rear window molding not complete
2. Passenger window rattle.
3 Rattle of center console (I think that might have been fixed)
4. Any air noises.
5 Molding alignments.

I know there is a good chance these have been address, I just want to make sure.

Anything else?
Click to expand...

Park, open back window and Rev rpm to 2k, see if any whining noise is heard. Check for same whining noise when driving above 80mph on freeway and slightly accelerating. Also listen for any wind noises or whistling at highway speeds.

bobcatou · Nov 29, 2023

Kap1 said: ↑

Park, open back window and Rev rpm to 2k, see if any whining noise is heard. Check for same whining noise when driving above 80mph on freeway and slightly accelerating. Also listen for any wind noises or whistling at highway speeds.
Click to expand...

What is the whining noise typically? Motor?

Kap1 · Nov 29, 2023

bobcatou[OP] said: ↑

What is the whining noise typically? Motor?
Click to expand...

Maybe... I didn't have time to diagnose yet

bobcatou · Nov 29, 2023

You are speaking from experience.

Blufin · Nov 30, 2023

Watch out for people when driving!
Lol

Piki · Nov 30, 2023

Mattedfred said: ↑

TUNDRA PDI

Confirm no outstanding recalls, TSBs, safety campaigns, service campaigns etc

Request a copy of the PDI document

Confirm all in stock accessories have been installed or are with the truck

Confirm gas tank size

Confirm payload number

Confirm presence of all weather mats, mud flaps and Toyota Owners Manual Portfolio (pouch for owners manual etc). This may only apply to Canadian trucks.

BODY

Check A pillar black vinyl wrap for curling, coming off or installed crooked

Check to see if there are any bumps on fender flares. Stand at about a 35 to 45° angle from the truck 6 feet plus from the wheel. Reports of 2-6 bumps on each trim piece

Check for bumps on body panels (reports of bumps possibly due to fasteners)

Check section just below tailgate handle for any early signs of wear between handle and tailgate

Test all lighting (exterior and interior) for burnt out bulbs. Confirm no burnt out LEDS in front, rear, or marker lights especially.

Check paint for smoothness. Reports of gritty paint.

Check paint for colour matching

Check for any damage, scratches, etc

DRIVETRAIN

Check all fluid levels possible

UNDERCARRIAGE

Using a flashlight, check for rust

Check rear axle bolts to ensure they are visibly tightened

Check for any visible fluid on bottom of engine and transmission

WINDOWS/DOORS

Check front door seals as some are not installed correctly or are cut too small

Check window seals as some have large gaps in the seals.

CABIN

Check stitching on seat covers

When adjusting the seat, make sure the seat rails do not make a pop sound

Check for any engine lights

Test climate control for strength and noise

Test heated steering wheel for warmth and distribution

Test heated seats

Test all windows for functionality

Check the back of the rear seats for wear. Reports of melted backing material.

Check the decorative door moldings (black strip down the doors) to ensure properly alignment and that they aren’t snapped. Reports of damage during shipping.

HEAD UNIT

Test cameras. There have been reports of some producing a purple screen.

Test bluetooth

Test USB ports for functionality and cable heating up

Test speakers and listen for rattle when bass is high

TEST DRIVE

Test auto start/stop button

Make sure steering wheel is straight

Listen for wind noise from driver and passenger doors at higher speeds

Listen for any clicking or rattling from headliner, A pillar and dash

Listen for brake squeal while driving forward and in reverse.

Test all steering wheel buttons for driving functions

Check function of lane departure, cruise control, and braking

Shift into 2L, 4L, 4H and reverse and listen for any unusual noises

Click to expand...

This sounds like check list when you buying RAM

Log in or Sign up

Welcome to Tundras.com!

Going to test drive, what to look out for

#1
bobcatou [OP] New Member

#2
Kap1 New Member

#3
bobcatou [OP] New Member

#4
Kap1 New Member

#5
bobcatou [OP] New Member

#6
Blufin Seasoned member

#7
Piki New Member

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tundras.com!

Going to test drive, what to look out for

#1 bobcatou [OP] New Member

#2 Kap1 New Member

#3 bobcatou [OP] New Member

#4 Kap1 New Member

#5 bobcatou [OP] New Member

#6 Blufin Seasoned member

#7 Piki New Member

Products Discussed in Entire Site Forum: 3rd Gen Tundras (2022+)

#1
bobcatou [OP] New Member

#2
Kap1 New Member

#3
bobcatou [OP] New Member

#4
Kap1 New Member

#5
bobcatou [OP] New Member

#6
Blufin Seasoned member

#7
Piki New Member

Products Discussed in