2017 Pop & Lock install question

I have everything installed but the T connectors to the wires for power. The directions do not match my vehicle. The directions call for a connection to a RED wire at pin 18 and a WHITE w/ SILVER DASH wire at pin 9. There isn't any plug that has this combination. I've serched everywhere and I feel like my year Tundra is a unicorn. Can someone give some direction for the connections?

 

I have a 17 and did mine. Can’t remember where I found the pin out though. I remember it was different than the pin out they gave in the instructions.

 

I guess I'll have to call Pop & Lock tomorrow. Do you remember how you figured it out?

 

I found a pin out online.

 

Can you explain what that means?

 

A pin out is a diagram showing what wire goes to what terminal. Someone else before me discovered it and posted online somewhere. It’s been some time and I can’t remember where I saw it. At the time I found it, I was at work and quickly printed it for later. I looked in my Tundra file and it’s not there. I must have tossed it out after I wired it.

 

i installed one of these on my 2017 last spring, don't recall locating the correct wires to be a problem. are you sure you're looking in the right spot?
here's a 2017 install video i found super-helpful. not sure if you need it, but i have a copy of my pop & lock instructions as a PDF i can share.

 

I saw that video and those are not the same color wires on my 17 Tundra which is why I posted this. I think that is a 2020 Tundra in the video. Here is a picture of my wires that don't have a red wire that the instructions call for. I finnaly got to talk a rep from Pop & Lock last night and he told me it should be the Blue with silver dots on it I need to use. He said he has seen this before on other trucks.

 

odd. my wires were as described in the video and the instructions

hope you're able to identify the correct ones and you get this working. good luck with your install and let us know how it goes.

 

Just a follow up on my 2017 Tundra SR5 Pop & Lock wire problem. The correct wires for my Tundra are the Blue with the silver dot and the white. The Pop & Lock wires Blue goes to the Blue with silver dot and the Pop & Lock Green goes to the White. Finished it today and it's so nice to have my tailgate lock when I lock the truck! This is definitely a great inexpensive mod for my truck.

 

Glad you figured it out.

 

Sorry I didn't see your thread previously! I ran into this problem with my 2016 and went by the wire locations instead of colors, and came to the same results you did. Still working great a year later!

 

glad you got it sorted @rodl12

 

Yes sir, just installed my popandlock today and had the same issue. I back probed the wires to find the correct ones which are the same as yours. 2016 Tundra.

 

We should fill in Pop & Lock to update their instructions!

 

I'm reserving my comment on that. If this has been happening since 2016 from what I know and they haven't revised their instructions which are only online you can fill in the blanks. I offered to send them a photo of mine and they declined. Is what it is.