Wiring question on Iforce Max Hybrid Models-door signals

I am trying to find out which wires signal driver and passenger side door open/close for Hybrid trucks. This AMP research instruction in the picture is for non-Hybrid models and does not work. Their tech line said to reverse the wires but that has not solved it either. Wondering if anyone here has had to track down this information for any projects they have done. Thanks in advance for any help!

 

I'm having the same problem and was curious if you got it figured out. Instructions call out blue and white wires in the AMP harness but all I have is purple and purple/black. Thanks!

 

I did. I took it to a buddy of mine that works for Toyota. Honestly i haven't taken the cover off to look at how he wired it since getting them working, but I will and send you some info.

 

Posting here as well. Good luck.

 

My AMP harness did not have the blue and white wires, only purple and purple/black. I called AMP support, who confirmed there are 2 wires (purple and purple/black) for plug and play to the OBD connector and blue and white for connector position-taps. He sent me some pictures, but when I told him mine is a 2024 Limited, he said it was not supported since they found issues with the triggers on the ‘24. I still thought it was odd that plug and play OBD port is purple and purple/black, but there is no white or blue in my harness. So, I am giving up and sending them back. Mine is not a hybrid. In the thread below, there is a hybrid installed. His are PowerStep XL. Mine are PowerStep Extreme.

here is the link to the other thread…
https://www.tundras.com/threads/amp-research-power-running-boards.135477/

 

Ultimate TUNDRA Wiring Diagrams Collection | Toyota Tundra Forum (tundras.com)

I still need to take the time to pull the 2023 and 2024 EWD's down (though nothing substantial has changed).