SOLD: JBL DSP4086 8-channel amp w/ Tech12V kit JBL audio - $400 shipped

This is set up as it came from Tech 12 Volts to plug-and-play for a JBL audio setup (originally for a 2020/21, but looking at the wiring diagrams, any JBL system 2014-2021 uses the same amp wiring). This amp goes IN-LINE after the factory JBL amp (you will keep the factory amp, just change the mounting of it).

New from T12V this setup is $489.

Includes:

• JBL DSB4086 amp, currently set with the T12V tune except that the master gain was reduced slightly from the +6dB it was shipped with
• Wiring harnesses for the amp all connected to adapter harnesses for plug-and-play to the factory wiring.
• 8AWG Power lead wiring to route to the battery, and ground wiring to ground at the lug located under the passenger seat under the carpet
• Remote sub volume knob with extension cable
• USB cable for adjusting amp settings (requires Windows PC)
• USB stick with the amp settings software, and a file with the original T12V tune saved
• Amp mounting board with screws
• 60A inline fuse (buyer will need to get their own fuse holder assembly of their choosing)
• Line level RCA adapters are labeled for the corresponding input channel for easy connection (makes shipping easier)
• Copy of the instructions from Tech12V. I can also email a copy.

PM me if you are interested

 

Sold