What long tubes are you running?

Never installed it after the engine went. This was in 2015. Now have hpt.

 

https://m.youtube.com/watch?v=R2JvA97zO7g&pp=ygUSQm9vc3QgZW5naW5lIGZ1bm55

 

I installed some SW long tubes with hi-flow cats. I also installed a MBRP dual catback. It sounds great but I have a p0420 and p0430 code. I need to get a tune other than that no complaints.

 

You'll need to run O2 simulators or install anti- foulers your secondary O2 sensors.

 

@Mdl I already installed the foulers. It ran good for about 35 -45 miles then it popped up again. I spoke to a friend of mine who tunes and has his own dyno and shop and said I would need to get a tune done. It’s like 1200$ for a tune with the trans tune.

 

Yep, the good ol one mod turns into 15 others.

 

Alternatively you could buy the HPtuners MPVI2/3 and tuning credits and (at your own risk) disable the reporting of those particular CELs.

 

Ouch...$1200, if you want to get tuned then sounds good. If your just trying to not get codes try a few different styles of anti-foulers. I always had good luck with the ones that you can change the length and diameter of the opening. I thought I saw in the supercharger thread member had good luck with the j shaped ones.

 

Funny every time I see it.
I hope that is not the fate of your engine.

 

This is exactly why I will stay away from this mod. At least until one of yall figures out a fool proof fix for us that have to get our cars inspected every year and emissions every 2 years.

 

Just run cats and have it tuned appropriately. Shouldn’t be an issue. That’s what I’ve always done but we only do obd2 emissions.

 

If you have any plans on the solid motor mount then doing them at the same time makes perfect sense